EK4 oil pressure sensor position

[Limbo]

Hi all. Just did an oil cooler and was going to put the oil temp sensor & oil pressure sendor on the b16, but the place that i had thought to use, which was the sadwich plate could not hold the sensors as the surrounding area was blocking it so the plate had to go in without the sensor. now.....

Can someone who has the oil sender sensor tell me where they put theirs?

The oil sender unit is about 1 1/2 wide by 1 inch long.

Can someone please help?

[ECU-MAN]

I used a sandwich plate on a ITR with no problems. got both Pressure and Temp in there, was an bit of a tight fit.

also on a EM1 I used a T peice on the oil pressure sendor,

your only other option for oil temp would be to get a nut that suits your temp sender welded into the sump if you cant use the sandwich plate.

[Limbo]

might need a T piece then cos the room around was not enough cos the unit seems too big.

[CTR Coupe]

mines on a t-piece where the standard sensor is above the oil filter.

[Limbo]

can you tell me where you got the T piece?