d15z1SUX
15-06-2006, 11:43 PM
http://www.crower.com/cat/import/honda/stroker/stroker.shtml
hrm dont know if this has been covered before, but just wondering if any1 has used these stroker kits. heard that people in america have used them for example a b16a stroked to 1.9L for drag application. would these kits be suited for street use? or even circuit? it also says "B18C/B16A applications require removing piston squirters. Due to inconsistencies in the factory blocks and cranks, some block clearancing may be required on all applications" so if the piston squirters are removed that means its not suitable for circuit?
hrm dont know if this has been covered before, but just wondering if any1 has used these stroker kits. heard that people in america have used them for example a b16a stroked to 1.9L for drag application. would these kits be suited for street use? or even circuit? it also says "B18C/B16A applications require removing piston squirters. Due to inconsistencies in the factory blocks and cranks, some block clearancing may be required on all applications" so if the piston squirters are removed that means its not suitable for circuit?