PDA

View Full Version : 4 point harness



[JNS 012]
24-06-2006, 11:13 PM
Hey has neone got this in there s2k??
if they do can u gib me some advice on how i install it??
and i dont think i can install it wif the stock seats..
or am i wrong ..:wave:

BRU51N
24-06-2006, 11:37 PM
ive seen them on stock seats, not too sure how it was mounted though.

slugger
25-06-2006, 11:32 AM
cannot mount with stock seats.
Defectable too.

chris2k
28-06-2006, 05:28 PM
Not recommended with stock seats, you need 2 backing plates for the 2 points under the seat, and there are several ways of installing the 2 behind the seat, best is to have a roll cage installed. Makes things much easier.

Mr_will
28-06-2006, 05:38 PM
cannot mount with stock seats.
Defectable too.


on what grounds? im pretty sure you can get adr approved 4 point harnesses

slugger
29-06-2006, 11:41 AM
Come to think of it, you can buy ADR approved 4 point harnesses. Thanks Mr. will.
So, yeah, just make sure you buy an ADR one and it should al be sweet.

Mr_will
29-06-2006, 12:46 PM
i would be interested to know where you get them from, and if you install them yourself, do a write up!