ITR Callipers

[dc2dc2dc2]

Hey guys,

Just a quick question just wondering if ITR Callipers and pads fit onto a GSi teggy.

I will be using ITR sized 4x100 rotors

Tankuuuuuuuuu :wave:

[Q_ball]

^Would like to know also...
should be fine im guessin, i jst need to confirm is all.

[Spunkymonkey]

They should fit. Obviously you would need to get type r brake pads in future as they are bigger than the stock gsi ones. But we can wait for someone else to confirm.

[VTECACCORD]

I don't think you can fit them without modifiying ur current setup.

I.E wont be a direct bolt on, you will definantly need ITR sized rotors though

[bennjamin]

relax guys .. Keep the crap and quoting to the lounge ok.

BTW ITR calipers + pads will only fit if the knuckle and hub off the GSI are the same (for fitment of the caliper to the hub etc).
At a guess *looks at spare ITR brakes* the calipers are larger , and need the ITR hub + knucle to fit onto anything really...

[EG5]

vtir or sir hubs/knuckles off civic EG6/integra sir/ vtir/ delson vtec

rotors redrill to 4x100 with hub centric ring

type R calipers shave 2mm off the bracket

[nd55]

rotors redrill to 4x100 with hub centric ring


Any idea where to purchase the relevant hub centric rings?

Nick.

[revNhevN]

It will work. vtir, gsi and type r all use the same knuckle/stub axle or whatever u want to call it. This is where the caliper bolts to.
your gsi + itr calipers + ITR sized rotors re-drilled to 4x100 = :D