Gearbox Help

[jimus888]

i own a 96 teg gsi and was wanting to know if anyone has done a auto to manual gearbox conversion on these beasts. what parts were needed to be bought and changed.
any thoughts would be great.
thanks

[bennjamin]

you will need -
*manual b series gearbox
* B series shift linkage
* clutch master cylinder/lines/ pedal
*also new brake pedal setup...

[jimus888]

so all the mounts are the same also? and flywheel etc? crank olt pattern?

[GReY_CVC]

I would like to know this as welll :P....

[solitz]

manual gearbox
Transmission Linkages
Transmission Mounts
Clutch
Flywheel
Pressure Plate
5 Speed Pedals
Manual ECU
Manual Gauge Cluster (optional)
Shifter and Shift Boot
Clutch/Slave Cylinders
Clutch Reservoir
Matching Throttle Cable for the Pedal Set
hydraulic lines
Intermediate Shaft
Upper transmission mount
from http://www.ozhonda.com/forum/showthread.php?p=921368#post921368

but why concider to do this conversion...why not sell and buy an actual manual car?

[jimus888]

manual gearbox
Transmission Linkages
Transmission Mounts
Clutch
Flywheel
Pressure Plate
5 Speed Pedals
Manual ECU
Manual Gauge Cluster (optional)
Shifter and Shift Boot
Clutch/Slave Cylinders
Clutch Reservoir
Matching Throttle Cable for the Pedal Set
hydraulic lines
Intermediate Shaft
Upper transmission mount
from http://www.ozhonda.com/forum/showthread.php?p=921368#post921368

but why concider to do this conversion...why not sell and buy an actual manual car?


lol, i did decide to sell up, got rid of the auto teg, got myself a manual civic. thanks anyway

[solitz]

oh my bad...talk about bring it back a thread from the dead

[jdmTYPE R]

the upper chassis bracket on the gear box side is different to a manual 1 auto sits a lil higher then manual, you would need to drill the bracket off and weld a manual 1 on

[Mike B]

Honestly it may be better sourcing a chassis thats already MT. Good luck regardless. :)