Cant get tacho to work

[hero]

I cant seem to get the tacho to work..


Is there anything on the OBD2B ECU - "A" Plug that works with the ICM or tacho? Im looknig at the table.. but there doesnt seem ot be any

[chunky]

did u install it urself ?

[CRXer]

ICM is controlled by the ecu,so ecu already knows what ICM is doing,it doesnt need a return signal.

What u need to find is a seperate wire which leads off the ICM (usually blue) and tracks back to the gauge assembly.

[hero]

ICM is controlled by the ecu,so ecu already knows what ICM is doing,it doesnt need a return signal.

What u need to find is a seperate wire which leads off the ICM (usually blue) and tracks back to the gauge assembly.


thanks CRXer...

Ill try that tonite and see how it goes..

Ill consolidate this thread with blitz's thread as we are talking about the same car and he knows more about it then i do..

:confused:

[ECU-MAN]

I cant seem to get the tacho to work..


Is there anything on the OBD2B ECU - "A" Plug that works with the ICM or tacho? Im looknig at the table.. but there doesnt seem ot be any


ICM on OBDIIb is B13 pin. on a OBDIIb to OBDI convertion harness A19 ( NEP ) and B13 ( ICM ) are joined together.