PDA

View Full Version : Easy way to figure out CRX year model???



CRXXX
07-07-2006, 06:47 PM
Hi everyone,

I was just wondering if anyone could tell me the easiest way to figure out what year model my CRX is.
Its registered as a 1990 model, but i have my doubts.

Can anyone help please..

Thanks

Snoop_gee
07-07-2006, 06:51 PM
open the bonnet and have a look @ the engine bay they should be some plates stamped with the manufature year and month.

when u fact the engine bay it should be on the right side.

czy_sol87
07-07-2006, 06:51 PM
show us a pic
and under the bonnet there is a build plate that tells ur when ur car was made

SINISTR
07-07-2006, 06:53 PM
does it have a squareish gauge cluster or a rounded one?
does it have long and skinny front indicators or a bit fatter/shorter ones?

my main two ways if identifying models 87-89 and 90-91.

czy_sol87
07-07-2006, 06:54 PM
also the front indicators
88-89 model has the 2 screws holding it in place, whereas the 90-91 is a clip

CRXXX
07-07-2006, 06:56 PM
thanks, it does not say under the bonnet on the plate, i just checked.
The indicators do how ever have two screws holding them in place.
Does it being Australian Delivered make any difference??

czy_sol87
07-07-2006, 06:58 PM
probly an 89 model then, my bro's crx is the same, first registered in 1990, but built in 89

CRXXX
07-07-2006, 07:03 PM
ok, thanks.

Also would you know at all, my rear bumper hangs out on either side by 1 to 2 mm, would this be because someone has put a 90-91 bumper on there?

SINISTR
08-07-2006, 12:27 AM
is the dash round on the top or square... around the gauges.

CRXXX
08-07-2006, 12:28 PM
the dash is square on top.

heist
08-07-2006, 01:07 PM
88-89 model then.

CRXXX
08-07-2006, 04:50 PM
Thanks guys

much appreciated.