PDA

View Full Version : JDM ITR 4-1 headers install issue


BlitZ
09-07-2006, 12:21 PM
I am having an issue wiht my JDM 4-1 ITR headers..

My std EK (im sure teg have the same issue) exhuast hanger before the cat doesnt bolt up what do use instead?

thanks ppl:thumbsup:
BlitZ
10-07-2006, 12:55 AM
asomeone must know
[[d a n n y]]
10-07-2006, 01:51 AM
what about the cat.
u using your stock cat?
BlitZ
10-07-2006, 09:37 AM
]']what about the cat.
u using your stock cat?

the cats fine.. i some custom work to get that fitted
barefootbonzai
10-07-2006, 09:44 AM
Just let it hang bro, it's not that important.
BlitZ
10-07-2006, 10:23 AM
Just let it hang bro, it's not that important.

dont want to crack the headers..
Ive already cracked 1 set..

are u running a flexi or the oem spring bs..

I reverted mine back to the spring bs and am afriad of cracking the headers.
Limbo
10-07-2006, 10:23 AM
I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all
BlitZ
10-07-2006, 10:24 AM
I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all
hey limbo,
are u running flexi or the spring joins?
barefootbonzai
10-07-2006, 10:25 AM
I was running the full OEM setup with the spring bolts and JDM cat.
vinnY
10-07-2006, 10:33 AM
I took that piece off. The exhaust is strong enough with the front bolting.
It hasn't affected my EK at all
speaking of the front bolt. anyone know what size it is or where to get one? lost mine while replacing the headers a while ago and now reverted back.
Limbo
10-07-2006, 11:37 AM
I ran a new flex, cos my headers had the back chopped to fit in.
Riceboy
10-07-2006, 11:47 AM
There is a special hanger to matchup with the exhaust manifold. Can let you know the part number if need be.

Dont really need it. I removed it as it was a PITA to put back on when the engine is in the car.
bennjamin
10-07-2006, 11:48 AM
+1 vote for "Not needed"...
BlitZ
10-07-2006, 11:54 AM
There is a special hanger to matchup with the exhaust manifold. Can let you know the part number if need be.

Dont really need it. I removed it as it was a PITA to put back on when the engine is in the car.

its the silver one on the left..
http://www.sandmracing.com/images/m/jdmheaderinstall/jdminstall-21-lowerbrackets02.jpg