Alignment settings

[spoondc2]

Any recommendations of the camber, castor and toe for a DC2R? Currently running stock shocks and the car oversteers during corner if i step on brake not matter how hard.

Current setting should be F:-0.5'' R:-1'' camber (all not adjustable), caster 1.5'' and F&R 0 toe

[aozora]

Why would you be stepping on the brake mid corner? Unless you're trail braking into which a little oversteer is nice for :)

Try a little bit more Toe in on the rear and see how you go with that :p
Stock alignment/suspension settings for the DC2R are apparently fairly good though?

[spoondc2]

Why would you be stepping on the brake mid corner? Unless you're trail braking into which a little oversteer is nice for :)

Try a little bit more Toe in on the rear and see how you go with that :p
Stock alignment/suspension settings for the DC2R are apparently fairly good though?

It's my way of driving :P hahaha
But i am having too much oversteer

I wonder what's the stock setting of dc2r? Anyone got the data?

[wynode]

http://whiteline.com.au/YourCar/kits/CK_Integra_DC2_TypeR.pdf

That's what Whitelines suggests for their kits.

[spoondc2]

Thanks for that :D

Anyone has the default alignment settings for DC2R?