PDA

View Full Version : Crazy MIL/CEL



kyle
18-07-2006, 09:08 PM
What would cause the MIL to flash crazy like, not like when checking for codes, but more Erattic. really fast. then on for a couple of secs, then off for a while, back on crazy like, flashin hell fast and random like.

happened after i takked, in 2nd, went normal
bbbbrrrrrrrrrrrrrrrrrrrrrrrrrrrBRAAAAAAPPPPPPPPPPP PPPPPPPPPPP

but when i changed into 3rd, vtec kept cuttin in and out.
brrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrBRAPPPPbrrrrrAAPPP brrrrrAPPPbrrrrAPPPPbrrrrAPPPP

thats when crazy MIL come on.

any ideas?

ECU-MAN
18-07-2006, 10:08 PM
its not ment to come on at all and blink unless you bridge the SCS. if it to come on while driving then it should stay on.

could be a fault with the ecu, or cluster/wiring problem

CRXer
19-07-2006, 03:02 AM
Yeah,fault with the ecu,sounds about right for the multiple faults.
Could also be an intermittent ground fault,check your neg terminal>chassis>tranny ground & the thermostat ground point as well.
Also might of shaken a shock tower connector loose on the 2nd tak or any ghetto connections done in the swap.
Maybe even check ecu connectors are pushed in properly.
Try gettin a code out of it.......