Oil catch can

[Jonathon]

I got a cusco oil catch can 15mm from ebay for my Civic 1990
But i was ment to get the 9mm i did know what do u think i should do :(
I posted a thread before what people think about catch cans and know one told me about 9 and 15 mm one said one size fits all
http://www.ozhonda.com/forum/showthread.php?t=30193

[Jonathon]

i got it from this seller gunners_76

[jdm_kid]

But i was ment to get the 9mm i did know what do u think i should do :(

huh ?
neways should of gotten the 9mm, as the 15mm would be for thr bigger engines imo ?
why dont u just get a 9mm hose? or do a conversion 15mm hose to a 9mm hose ? u know what i mean ...

[marte]

they all fit all. lol but with oil catch cans there really for skylines. skylines get the most benefit out of them. i've got one in my wrx doesnt really do anything more show then anything.

[Jonathon]

i get some 9mm hose but i need to get the fiting to fit a 9mm

[jdm_kid]

i get some 9mm hose but i need to get the fiting to fit a 9mm

:confused:

[aaronng]

I got a cusco oil catch can 15mm from ebay for my Civic 1990
But i was ment to get the 9mm i did know what do u think i should do :(
I posted a thread before what people think about catch cans and know one told me about 9 and 15 mm one said one size fits all
http://www.ozhonda.com/forum/showthread.php?t=30193
You didn't ask that in that thread whether a 9 or 15mm one would fit. Someone just said it should be 1 size fits all and you went ahead and bought it.

Well... Now that you are stuck with it, get step down adapters from 15mm to 9mm. Remember to get those that can withstand high temperatures.

[Jonathon]

ok thanks aaronng would u know anywhere in Perth where i could get a adapter

[JasonGilholme]

Go and talk to the dude at your local hardware store. he'll know what you need.

[aaronng]

Hardware store. Ask for 15mm-9mm hose adapters. Try to get stainless steel ones or at least heat resistant plastic. Get some hose clamps as well for the hose outer diameter so that the hose does not pop off from the adapters. If you are using plastic adapters, be careful not to overtighten.

[vinnY]

assuming you're talking about ID when you mention the sizes, you can get a small piece of 9mm hose and push it on, get the next size up and push it on
then push your 15mm tubing with the kit over it and tighten it nicely
it might be a bandaid fix but does the same thing as the adapter :)

[Jonathon]

thanks for all your help

[Limbo]

Pirtek sell the adaptors, Catch cans are one size fits all. It just depends on the lines your using and the connectors.