Removing Cluster Cover

[EK4R]

hey guys
got a ek4
want to remove my cluster plastic cover. just wondering what are the steps involved?
want to paint my needles and clean the inside.

[mrwillz]

http://www.ozhonda.com/forum/showthread.php?t=46322&highlight=cluster
this may help
theses a mini diy in there sumwhere

[simbadda54]

Take 2 screws out on the black thing. Take 4 screws out that hold the cluster in place. Unplug the 2 looms in the back. There should a couple of clips holding the plastic cover on so unclip those and ur in. THeres just a few more screws u need to take out from there which should be pretty easy

[EK4R]

ah thanks alot for both replies!!
will try tonight and see how it goes
cheers

[EK4R]

oh i have another problem...taking out the cluster is one problem. but how do i go about taking off the plastic clear cover thats on top of the cluster??? i need to get INSIDE the cluster..like touch the needles etc. can this be done??
its not glued together like the headlights is it? or is it clip-ons ?

[simbadda54]

just a couple of clips man. its easy. If u want to get the needles out u might need to unscrew a few thing on the cluster. Ive done it b4 but forgot exactly wat u need to do.

[tRipitaka]

just remember when taking the needles out, to be careful.. last thing u want to do is break something, or put your calibration outta whack

[Zdster]

PM me if you get stuck and I will walk you through it :thumbsup:.

[AZ51LK]

do Not Take The Needles Off. Big No No Pal.

[EK4R]

thanks for all the helpful replies :)
na im not taking the needle out, just giving an example so ppl know what im talking about. and zdster thanks for the offer. i think i got this one. however i might need you help on how to remove my rear mugen wing off my hatch. its the same as putting on a CTR wing yes (in reverse)? except without the wires? i pmed you zdster