best size exhaust 4 crxd16a8

[hyrpm]

wat is a good size exhaust for a crx with d16a8 in press bent as i read in hot 4s that if your getting press bent just go 1 size up from what you were getting mandrel bent

[destrukshn]

2.25 in my opinion.
or 2inch mandrel bent,

[hyrpm]

does mandrel bend make a difference if u went 1 size up in press bend is it worth the extra money

[destrukshn]

in my opinion.
mandrel bends are the way to go.
i reckon so, i've bolted up a mandrel bent cat back to my car, from the press/crush bends.
and the mandrel bent system was more reponsive with a bit more power.

[marte]

2inch to 2.25, anything more then 2and a half your just gonna looose power.

[NeRV]

yep just like these guys have been saying... 2.25 imo is the best size

[hyrpm]

thanks for the info guys

[crx88rb]

what power are you after? if its not big just average, then go press bends cause the price of getting mandrel bends is a lil bit to much for the lil bit of power you would get out of it, it might not be worth it. and yes 2.25 is as biggest you should go

[JDMCVC]

get 2 inch mandrel bent, but just try and keep the exhaust straight as possible, under the axle if need be, and get a good quality high flow cat.

[hyrpm]

not really after big power just the stock exhaust is rusting out

[SIObsesst]

yep i agree stick with a 2 or 2.5inch, as my eg si has a 3inch and i loose alot of power.

[EG5[KRT]]

id prob stick with 2 inch mandrel

[TYPE-ONE]

Yeh you lose power But i bet it sounds sick.