Fujitsubo power getter on DC2R

[Zilli]

Any opinions? are they any good, and can anyone comment on the fact that taking an inch off the tip makes a difference? this sounds stupid to me

Apparently they are not a noisy exhaust unless our really giving it... correct?

[barefootbonzai]

lol, the 1 inch he cut off the tip loses 50% of power and torque.

There is no way cutting 1 inch of a tip make any difference to performance.

[Lowa]

You never know Fujitsubo must have designed the exhuast like that for a good reason, other than looks hopefully ...

[macoman69]

Its not noisy exhaust.
Im not too sure on what effects there will be if you cut the exhaust

http://www.boomplustoys.net/Fujitsubo/media/fujitsubo_dc2_powergetter.MPG

This website has a movie clip and sound of what the powergetter sounds like when you give it some.

Hope this helped abit

[Zilli]

lol, the 1 inch he cut off the tip loses 50% of power and torque.

There is no way cutting 1 inch of a tip make any difference to performance.


hehehe, thats what i would think too mate

any opinions on this exhaust, i know some people say its ugly but i dont mind it. How do i idnetify that its the real thing? and is it a straight botup to standard AUSDM cat? is there a flange there to bolt it too?

[Zilli]

Its not noisy exhaust.
Im not too sure on what effects there will be if you cut the exhaust

http://www.boomplustoys.net/Fujitsubo/media/fujitsubo_dc2_powergetter.MPG

This website has a movie clip and sound of what the powergetter sounds like when you give it some.

Hope this helped abit


thanks bro... i love the sound of it

[macoman69]

JDM Flange is alot bigger than AUDM

[Zilli]

so does that mean it nees to go to an exhaust shop to go on? its not a direct bolt on?

Other than the flange, is there a need to do anyhting else? int erms of the length or anyhting like that

[macoman69]

apart from the flange im pretty sure that length shouldnt be a problem.
Unless the JDM type r is longer or shorter (which i highly doubt lol)

But yeah you will probably have to take it to an exhaust shop unless you have jdm cat + extractors (if its going to the stock ones than you will need to take it to an exhaust shop.

I had this same problem but with my extractors. Ended up putting on a flex joint with a bigger flange to the stock cat

[Zilli]

hmmm... yeh for the moment its going to the stock ones... how much you reckon itd cost to get a new flang put on either the B pipe or the end of the cat?

[macoman69]

Im not sure you would have to speak to the exhaust shop

[barefootbonzai]

JDM cat is not only larger but shorter too compared with the aussie one. So you'll have to shorten the b-pipe as well if you wanna keep your stock cat.

[macoman69]

doesnt fujitsubo come with jdm cat???

[barefootbonzai]

don't see any reason y it would. JDM cats are hard to get a hold on.

[Zilli]

new cats are ridiculously expensive arent they?

[barefootbonzai]

you don't have to get a oem jdm cat. Some exhaust shops should be able to fab one up for you.

[Zilli]

how much do they cost usually, anyone have any idea roughly how much tisd cost?

and recommend someone in the north who does a good job, im located around ryde

[bubblecivic]

I have Fujitsubo PG on my EM1 and I love it!! It sounds very nice and roars very deep! I heard it when it was just a catback and it sounds more quiet but since I've got 4-1 headers its roars louder! Not loud as Buddyclub and Trust like I've heard before.

[chai]

i got one on my dc2r. sounds awsome =p. ull love it

[Zilli]

i got one on my dc2r. sounds awsome =p. ull love it


hey man

so is it noot loud? if im just cruising low revs how much louder than stok? it isnt one of those shitty droning exhausts is it?

also, did you mate it up to a standard header? if so, what did you do with the cat? new one or did you cut the bpipe? and how much did that cost

thanks man

[Iwishiwasa Type R]

delete

[chai]

nah to me its not loud. i dont know how much louder it is thenstock because when i bought my car it didnt have the stock exhaust on. but i did have a x force twin loop on before and found it a bit quieter. as for headers and cat i got a toda header + jdm ITR cat

[simbadda54]

The powergetter i bought form barefoot bonzai only needed a flange change. How come they didnt need to mod my cat? by the way the flange should cost 50 bucks

[TECBOY]

yep i had to replace a flange on my car once, 50 bucks is wat they charged me