PDA

View Full Version : how do i install c-pillar and spoon wing in a Eg



G-Stick
29-07-2006, 02:41 AM
hey as title says.

i cant firgue out how to take off the rear wing. also is there any bolts in the rear that i can put the c pillar on?

if anyone has done this can they plz help a dude out :thumbsup:

cheers
Duy

SLOWEGG
29-07-2006, 02:44 AM
Open the rear window up and underneath should be some bolts. As for C pillar, try the gas shocks at the back of the window.

G-Stick
29-07-2006, 02:48 AM
i cant find the bolts, got any pics?

thanks

aznpsuazn
29-07-2006, 05:21 AM
C-pillars [bars] go into the seatbelt pivots bolts, on the C-pillar. The gas shocks are for the strut brace.

incoming
29-07-2006, 08:04 AM
i cant find the bolts, got any pics?

thanks

covered before
http://www.ozhonda.com/forum/showthread.php?p=483683#post483683

marte
29-07-2006, 10:23 AM
if you lift your rear window all the way up, at the edge you'll see the bolts.

G-Stick
29-07-2006, 10:34 AM
thanks guys.
as for the c pillar the eg hasnt got any visable seatbelt bolts so do i have to cut the interior plastics and bolt it through?

egads
29-07-2006, 10:55 AM
thanks guys.
as for the c pillar the eg hasnt got any visable seatbelt bolts so do i have to cut the interior plastics and bolt it through?

yes, otherwise remove trim and leave it out. ghetto :thumbsup: