how to install the plate light?

[civicVI]

just a quick question!
how to remove the plate light from the back door? as i want to change the other color LED!
thx

[civicVI]

pls show me or teach me!
thx

[STTICH]

go through your owner's manual. there should b exact steps for u to follow.

[LSD GD3]

just a quick question!
how to remove the plate light from the back door? as i want to change the other color LED!
thx

is soooo easy it just pulls out
but from one side angle

[vividjazz]

Requires a fair amount of force.

[edy_l]

are you referring to the number plate light?
is easy .. open your back door until you can see the light from horisontal view .. hold the door with your left hand and slide the bulb cover to the left with your right hand (or you can ask one of your mates to hold the door for you) :) ..and you can pull it all the way out to change the bulb ..

[tonich]

are all interior light uses same bulb as plate light (T10)? I read thorugh manual but it provides only voltage of bulb didnt mention which type to use.

are front parker light uses T10 as well?

[LSD GD3]

are all interior light uses same bulb as plate light (T10)? I read thorugh manual but it provides only voltage of bulb didnt mention which type to use.

are front parker light uses T10 as well?

no they are not... T10 is just small light and plate lights

interior is 3cm Kelly12V8W

[LSD GD3]

Requires a fair amount of force.

no it would not need much force if you doing it at the correct angle :wave:

[civiceg9]

License Plates and Parkers are T10(10mm in size hence the name)
If you need help to install it u can come to me in Melb
or just ask any follow members of ausjazz. I think ahcash will help u out.

[civicVI]

thx everyone did it already!thx