EG rear disc conversion

[garett]

hey guys,
thought its about time i do the rear disc conversion in my EGG,

im looking to buy the gear so i posted a WTB in the WTB section and getting plenty of replies which is good,

what parts do i need is the question. do i just bolt the new rotor and caliper onto the existing hub or do i need a new hub to support the calliper and hub,,

im getting mixed answers from a few peeps so if anyone can help id be greatful
cheers

[SLOWEGG]

Do a search as this topic has been covered many times. Basically you will need the whole assembly, ie. trailing arm, disc, calipers and handbrake cables. Afterwards it will be good to also upgrade your master cylinder / brake booster and proportional valve.

[Steer^Gimic]

Do a search as this topic has been covered many times. Basically you will need the whole assembly, ie. trailing arm, disc, calipers and handbrake cables. Afterwards it will be good to also upgrade your master cylinder / brake booster and proportional valve.



OVER KILL


maybe you should search instead of listing half of the things he doesnt need

[garett]

yeh, just want a list of the parts i need.

does anyone know if the back of the hub has the same mounts for the calliper as it did for the drum drum

did a search and found jack shit

[ECU-MAN]

Do a search as this topic has been covered many times. Basically you will need the whole assembly, ie. trailing arm, disc, calipers and handbrake cables. Afterwards it will be good to also upgrade your master cylinder / brake booster and proportional valve.


Im with SLOWEGG,

posibly not the booster though, but if your anal about it you can do the BMC and prop valves.

works ok with out them.

[garett]

can anyone point me in the right direction of a DIY