What is my final drive ratio???

[locote]

with stock wheels and tyres doin 100kph the tacho shows 3200 3300 rpm..
any one with similar.
reason is the stikker on the box was peeled off :(

Thanks for help guys

[SLOWEGG]

4.4 ?

[CRXer]

Are they stock size wheels for the gearbox?

State your 1st & 2nd redline readings,in the appropriate speed zones of course.

[barefootbonzai]

3200-3300 sounds like Teg VTiR box. 4.4 FD

[locote]

i can manage 100kph redlining 2nd gear.
They just feel so long thats all

[sivic]

yeah VtiR ratios are long. an ITR box would be a great investment for the dragstrip

[T-onedc2]

DC4 ratio is longer than DC2, I think 4.1 or 4.2ish. I recall this being covered in another thread though.

[CRXer]

My 4.4 FD Y80 box with equivalent stock size Integra wheels does,at between 8000-8100rpm,60km/h in 1st & 106km/h in 2nd.

[locote]

sound like my

[Felix]

My Teg VTIR (with stock gbox)
sits on about 3300 at 100km/h in 5th.
I get about 105 - 110 before fuel cut in second.

as i said, my box and final drive are stock. So it sounds as though you have the same final drive as the stock teg VTIR one (which is probably the same as the B16a one)

[Felix]

DC4 ratio is longer than DC2, I think 4.1 or 4.2ish. I recall this being covered in another thread though.

yeah DC4 has a longer final drive then DC2 VTIR. But DC4 redlines much lower therefore "feeling" as though its shorter.. Due to shifting at lower kms/h then DC2.

^that make sense.

[locote]

sure does:)
Feel ripped of driving the GSi after driving my civic lol.