anyone ever done a power window conversion in a EG?

[garett]

has anyone ever done a power window conversion in an EG

mine has windies
just out of interest, does anyone know whats involved??

[Zdster]

has anyone ever done a power window conversion in an EG

mine has windies
just out of interest, does anyone know whats involved??

Not on an eg, but an ek.

Search Honda-tech as it has been done some many times that you wont be able to count them all.

[mrwillz]

i got myn done last month mikey
not really wat as i desired as, wen i had no power windows??? i got my alarm installed and what the lazy kunts did was use the power window loom (plug and play) and use it as a central lock motor source.
so what happens now is, had to get it rewired (still connected to the central lock motor) evey time i go up or down , the central lock motors gets tripped to. (driver side only) eg. wen i put it back up, it locks, and down, unlocks)

ebay wud haf some power window motors available as i know myn are from there...
u wud also need power window door trims+ window switches...
and electrician shud be able to do necessary wiring

[garett]

i imagine that they would be very similar to do the EG and the EK that is.

do you know if the parts wust go into my old door, i know that i would need the new door trims and motors and stuff but what else is needed.??

[Zdster]

i imagine that they would be very similar to do the EG and the EK that is.

do you know if the parts wust go into my old door, i know that i would need the new door trims and motors and stuff but what else is needed.??

As I stated, please search.

What you will need:

Window regulators
Motors
Door wiring (or make this yourself)
Floor harness (or make this yourself)
Power switches
Door trim

[garett]

thankyou

zdster

[[[d a n n y]]]

done it in my current EG
what u need is
power window door trim..
swtiches
the power window arms
regulators
and wirings...

u can use your standard indicator lines
but u must squeeze in the whole window (door plug) which is located between the door and the chassis
best way to tackle it is to rip off the whole front wiring from the underdash fuse box off a power window EG
and cut and paste it
ie repluging the 3 clips which are light green/teal coloured
the 3 plugs will contain the power source for your windows...
another set of 3 wires will have to run across your firewall to connect up the driver side and the passenger side..
mate sure u put in the regualtor with out it the windows wont power up
i spent about 200-300 for the window conversion and took me about 2 hours mucking about on 1 side and 30mins after i was familiar with it

[garett]

you didnt happen to do a DIY did you danny

[Zdster]

you didnt happen to do a DIY did you danny

Here you go:
http://www.honda-tech.com/zerothread?id=1065575

[garett]

thanks again

[[[d a n n y]]]

yo garett if u need help shoot me a pm

[philta]

if u need any parts (i have an Ek 99 4-door wreck though, not sure if it would be the same) give me a pm.

[garett]

yeh danny wouldnt mind a little guidance.

i am confident with wiring and things like that
guess i just need a list of what i need. so i can go to the wrecker and buy it
or if this bloke ek gear will work would be interested, i would still need to get some door trims