PDA

View Full Version : Centre Console Climate control compatability ?



Andrew21
28-08-2006, 11:19 AM
Hey guys, i have a centre console from a Sir-jdm integra which as you can see if slightly different - It has numbers for the temperature instead of blue and red for cold , and also has a "AUTO" button feature.

This is like the AUDM one i have in now :

http://www.team-integra.net/images/BAEC1978-D3A7-4405-AB2D-2761DC15A96D/articles/jonmon/climate/pic01.jpg

And i want to replace with this :

http://memimage.cardomain.net/member_images/12/web/828000-828999/828739_121_full.jpg

Just wandering if anyone has done this before and are the plugs at the back exactly the same / will the auto feature work e.t.c

Want to make sure before i start ripping it out..

Thanks..

Andrew21
28-08-2006, 03:29 PM
Anyone?

ICACHA
28-08-2006, 09:28 PM
it will work the same as the one you got, different buttons dont mean it will work any different...

aka_NSX
28-08-2006, 10:21 PM
i'm very sure is different, coz on the climate control always has the AUTO setting and temperature sensor means that you can always set the degree temperature in the car so if u set at 22 degrees so inside the car will always stay 22 degrees all the time thats why if you get in the car after you park your car under the sun then you set the A/C at AUTO mode set at 22deg the fan will automatically blow very strong then after the room temperature drop to 22 deg the fan will go slower too , but not on the AUDM one but u can always try it thou........

ICACHA
29-08-2006, 08:22 AM
Laski, if he was only changing the panels then it would only work the same as his one in the car now, if he was to change over everything including the climate side of the air cond. then the auto would work :p

Andrew21
29-08-2006, 09:31 AM
Hmm ok.. Well i will be changing over that whole ( 1 peice ) of climate control , ( includes two middle vents ) it comes off as one piece...