b18 short block problem

[BIG`O]

heya.

came across a b18c7 block. there is one concern on it.(see pic)
now, some have told me it will require boreing the block.
others say new sleeves. I have been told the pistons are ruined.

i need a straight answer.

and also a cost for:
A) boreing it out 1.25mm
B) replacing the itr sleeves.
C) oversized pistons to suit

any info regaurding this is very welcome

http://img225.imageshack.us/img225/1196/bwy1.jpg
*not the gouge in the middle cylinder..
thanks
Shane

[BIG`O]

attachments dont seem to be working at the moment...

[egSi]

how much is the block for sale for?

[jimmeh]

A) boreing it out 1.25mm bore and hone is about $120-150
B) replacing the itr sleeves. Golden eagle sleeves are $2200
C) oversized pistons to suit- aftermarket pistons $760-850

[ProECU]

1.25 is probably on the high side...

i'd look at aftermarket sleeves, considering you're forking out for aftermarket rods in any event.