eKKy
04-09-2006, 02:27 AM
Hi pplz,
I'm looking to do a rear disc conversion on my EJ8 coupe with 96 model ITR parts. I have done a search, and came up with this thread.
http://www.ozhonda.com/forum/showthread.php?t=35206&page=2&highlight=ek+civic+rear+disc
What I need is confirmation for all the parts required.
- ITR trailing arm x 2 (or can I use any trailing arm?)
- Emergency brake cables x 2
- Proportioning valve
- Master cylinder
- ITR caliper x 2
- ITR disc rotor x 2
- ITR OEM brake pads x 2
- ITR brake lines x 2 (maybe stainless?)
Is there anything else to consider? I'll be using this for mainly street driving, with occasional spirited driving (RNP, OP etc).
Thanks in advance.
I'm looking to do a rear disc conversion on my EJ8 coupe with 96 model ITR parts. I have done a search, and came up with this thread.
http://www.ozhonda.com/forum/showthread.php?t=35206&page=2&highlight=ek+civic+rear+disc
What I need is confirmation for all the parts required.
- ITR trailing arm x 2 (or can I use any trailing arm?)
- Emergency brake cables x 2
- Proportioning valve
- Master cylinder
- ITR caliper x 2
- ITR disc rotor x 2
- ITR OEM brake pads x 2
- ITR brake lines x 2 (maybe stainless?)
Is there anything else to consider? I'll be using this for mainly street driving, with occasional spirited driving (RNP, OP etc).
Thanks in advance.