PDA

View Full Version : dc5 recaros into dc2 how to??



Jomsy
07-09-2006, 04:01 PM
what involved in fitting dc5 itr recaro's to a dc2, is it just a case of bolting dc2r recaro rails onto the dc5 recaro's or is there more to it

tRipitaka
07-09-2006, 05:32 PM
dc2r rails should bolt onto the dc5 recaros, as they're both "SR" type..

Mst_Mugen
07-09-2006, 07:42 PM
umm... dun know about that.. but i think its been covered several timez already..

Astro
08-09-2006, 10:29 AM
Jomsy: i wacked on some dc5r seats to my dc2r and its easy. all u have to do is replace the dc2r rails over to the dc5r seats and bang there in...the bolts on the rails line up to the seats (4 x 10mm bolts on each side of the rail)

only issus is that when u recline the seat to get in/out of the back the top of the dc5r seats touch the roof. But it doesnt matter coz there is still heaps of room to get in and out of the back of the car.

.::F[L]Y::.
08-09-2006, 11:04 AM
yeh pretty simple procedure. just put the dc2r recaro rails onto the dc5r seats and away you go. Mine is a vtir so i changed out the center console to the dc2r slim console to open up abit more room.