DA9 error code

[tegboy]

I have had my Integra for a number of years now. I have tried to do the ECU check, by using the paper clip in the correct plug and my Integra, will no display codes. Does this mean, there is no faults or am I doing something wrong??

I thought it should it should light up solid if there is no problem??

The light obviously works, ad the ECU light in cluster illuminates during starting

[ACTI0NMAN-1]

is your car obd1 or obdo. obdo dont need the paper clip as the light in on the board. obd1 needs a paperclip or switch to show codes on the CEL.

[proton]

May be useul to read this http://www.ozhonda.com/forum/showthread.php?t=20430&page=2&highlight=error+codes

BTW Anyone know what the codes mean? Like a list or something?

[tegboy]

is your car obd1 or obdo. obdo dont need the paper clip as the light in on the board. obd1 needs a paperclip or switch to show codes on the CEL.

Its a 1990 model, of course its obdo :) thanks, didn't think of that. But it does still have that little plug under the dash that the paperclip goes into.

[Cold Fusion]

dude for our cars you dont need the paper clip or anything! thers a light which is ON the ecu, and if u pout ur car onto accesories mode u can see the light shine if there are any problems