PDA

View Full Version : needed superquiick URGENT help


nugget666
10-09-2006, 06:19 PM
Where abouts are hte central lockign wires found?


Is there a spot out side of the door undereanth the steeringwheel. as its impossible to feed wires into the door.
nugget666
10-09-2006, 06:25 PM
or how can i feed the wires through ?? as there isnt much of a gap and its bendy as hello
m3ntAL_l2
10-09-2006, 06:27 PM
find the a spare hole in the firewall,
open ur bonnet and u will see some black rubber cover things, try take emn off and u will see the hole, feed the wire thought teher and go inside of the car i to see if the wire has came out from this end, if not try another hole
nugget666
10-09-2006, 06:41 PM
how do i get it into the door though.
m3ntAL_l2
10-09-2006, 07:23 PM
ohhh.... mmm u got power mirror??? they should hav wire runnin into the door already, so take off the door panel n then just follow the wires thats already theer n attach the new ones on to it
thats wot i think anyways
nugget666
10-09-2006, 07:34 PM
dosnt work lke that. the original wiring has a plug at the end of it and its friggin impossible to feed through.


I have ended up making my own new hole to the door i hope it friggin works as my car is in peices and i need it for work lol
m3ntAL_l2
10-09-2006, 08:02 PM
lol... mmm then dont think tehers holes on the doors then, cos if teher is the water will get in,
drill one ftw :)
destrukshn
10-09-2006, 08:05 PM
what are you trying to do exactly dude?
m3ntAL_l2
10-09-2006, 08:06 PM
run a new wire into both the doors i think,
destrukshn
10-09-2006, 08:08 PM
but what for?
the car already has central locking standard i'm quite sure of it, that's why i'm curious to see what he is doing.
ECU-MAN
10-09-2006, 08:12 PM
I think he want to run the two trigger wires to the central locking relay that is in the door,

make your own hole like you did, use touch up paint to cover the bare metal of the hole you made and use conduit between the door and car.
nugget666
10-09-2006, 08:41 PM
but what for?
the car already has central locking standard i'm quite sure of it, that's why i'm curious to see what he is doing.



I have bought an alarm that was on special purely for the fact i will make my car keyless entry. but also have a shock sensor alarm as a bonus.


the car has factory keyless entry. I was had to work out a way to get the alarms wires into my keyless entry relay so i can make my remote trigger the door locks.

I had to drill my own hole then plainted it so it didnt rush then ran a rubber grommet type hose with my new wires then sealed it up with a bucket load of grease.



I hope that made sense my fingers are numb its cold and im tired as shit.
Alpine
10-09-2006, 08:43 PM
Wow, sounds like quite an operation...

Hope it all works out.
nugget666
10-09-2006, 08:45 PM
Wow, sounds like quite an operation...

Hope it all works out.




Well teh hardest part is over.


just glad i got my car driveable so i cna get to work. then i will pull door trims of and wire the central locking up and im finished.

the alarm part of it is working a treat.
ECU-MAN
10-09-2006, 08:50 PM
you doing this on an EK ?????


from memory I usd to change the central locking relay to be able to add aftermarket keyless entry.
nugget666
11-09-2006, 04:16 PM
you doing this on an EK ?????


from memory I usd to change the central locking relay to be able to add aftermarket keyless entry.



yeah its being done on a ek.