front and rear tie bars

[C_I_V_I_C]

has anyone got a picture of a front and rear tie bar installed on their car having troubles understanding where they fit.
thanks

[Zdster]

The rear bar is installed using the same bolt holes as the rear lca's. It sits just below where a sway bar would normally be placed:
http://img149.imageshack.us/img149/3441/tie1ke8.jpg (http://imageshack.us)

The front sits in a similar sort of position:
http://img178.imageshack.us/img178/9164/tie2we5.jpg (http://imageshack.us)


**Note they are not pics of my car :).

[Limbo]

measure the ends and you will see where it sits. It can only basically sit in one spot.

The front is where the 2 main bolts that hold the front control arms in. The rear is the 2 main bolts that hold the rear control arms. Pretty simple.

[E-Honda]

*OT* is there much point installing rear tie without upgrading sway bar.

have heard many mix responses.

[Limbo]

i put my tie bars on before i put my swaybar on and i noticed a difference. It made the car less jumpy when steering into corners at high speeds.