Best way to Install Amp for EJ8

[V-TEC_BABY]

Hey guys i have just bought an amp for my car.

Just wondering for those who have or had an EJ8 the best way i can install this? - Feeding wires to battery and head unit.

Your help in this matter would be greatly appreciated.

THANKS

[stanleym]

put the amp in boot as well as sub if u get one ......how much info do u need about wirin to headunit etc...........u will only need one wire to the battery and u should find a grommet that can go through the firewall... post up a bit more info if u can man cheers

[stanleym]

also i am not positive wat an ej8 looks like so hereare a few write ups i can giv u.... it tells u how to get to the headunit and remove it resulting in u being able to put rca cables and remote cable into the headunit which are required to run the amp =)

ALL ARE .PDF

1999 - 2000 model civic (http://installdr.com/InstallDocs/Honda/PDF/466005.pdf)
1996 - 1998 model civic (http://installdr.com/InstallDocs/Honda/PDF/466013.pdf)
1993 - 1995 model civic (http://installdr.com/InstallDocs/Honda/PDF/466017.pdf)

hope it helps a bit man

[Fhrx]

V-TEC BABY, could you perhaps tell us the size of the amplifier? vbmenu_register("postmenu_881634", true);

[V-TEC_BABY]

It is a Kenwood KAC - some thing it is only 600Watts Max i will just use it for my rear speakers at the moment (kenwoods also - 500W max 90W RMS)

The amp puts out 100W rms at 4Ohms (for the speakers)
or
i think 300-400W RMS Bridged.

I just want to know how i can feed but also hide the wires, RCA's etc.

I have a 96 civic Coupe (I LOVE IT SO MUCH) - but would rather EM1 :P

[stanleym]

u go from headunit under carpet follow the door liner then up under carpet again behind rear seats and out the back