dc2itr
12-09-2006, 06:26 AM
Trying to find the stock Rotor sizes on a AUDM DC2 Type R.
Already tried searching and the only info I could find was from o'seas so not sure if same as AUS Model.
Anyway, this is the info I found:
Acura Integra dc2 Type R
Dimensions (mm)
F/R DBA No. Sol/Ven A B C D E F
Front (X/S) 478 Vented 282 47 23 21 70 5
Rear (S) 477 Solid 260 48 9 8 64 5
S = Std Slotted
X = Std Gold (Cross-drilled & Slotted)
Can anyone Confirm this info for me please to make sure it is correct for the AUDM model DC2 ITR.
And was Jap the only one's to get the brembo's or did the US get them too?
Already tried searching and the only info I could find was from o'seas so not sure if same as AUS Model.
Anyway, this is the info I found:
Acura Integra dc2 Type R
Dimensions (mm)
F/R DBA No. Sol/Ven A B C D E F
Front (X/S) 478 Vented 282 47 23 21 70 5
Rear (S) 477 Solid 260 48 9 8 64 5
S = Std Slotted
X = Std Gold (Cross-drilled & Slotted)
Can anyone Confirm this info for me please to make sure it is correct for the AUDM model DC2 ITR.
And was Jap the only one's to get the brembo's or did the US get them too?