View Full Version : DA9 Cooling hose sizes.
Mr_will
17-09-2006, 12:30 PM
I need to replace most, if not all of the hoses in my cooling system as they are old and shitty, summer is approaching and i dont want to overheat
the service manual i have doesnt give part numbers or anything for the hoses, and im assuming since things are a relatively snug fit that if i dont get the right stuff ill end up with kinks, and no/less cooling
does anyone know the part numbers for these hoses, or where i would be able to buy a full set (i intend on fitting them myself)
ACTI0NMAN-1
17-09-2006, 12:41 PM
have yo got a helms manual. if not do a search as i posted up a link to a d/l version. i'm not sure if it lists part numbers but it may be worth a look
save you searching
http://spoonhonda.com/downloads.htm
SKREMN
17-09-2006, 12:42 PM
I just told honda what i wnated and they gave it to me
$50.00 for the top hose if i rember correctly
RiCe_da9
18-09-2006, 10:57 PM
i bought my top and bottom hoses for 30 bucks frm a honda wrecker...bought them 3 years ago...never had any probs wit em so far
Mr_will
18-09-2006, 11:30 PM
i bought my top and bottom hoses for 30 bucks frm a honda wrecker...bought them 3 years ago...never had any probs wit em so far
um...thanks for the reply but it really isnt relevant/helpful
Mr_will
18-09-2006, 11:32 PM
have yo got a helms manual. if not do a search as i posted up a link to a d/l version. i'm not sure if it lists part numbers but it may be worth a look
save you searching
http://spoonhonda.com/downloads.htm
thanks dude but unfortunately that doesnt have the part numbers
Redteg
20-09-2006, 06:22 PM
I'm sure a car parts store would have product manuals which list all the hoses for the LS (if aftermarket ones are available). Just go to them and tell them what you need, let them do the work!
As an aside, and in case anyone gets stranded...Years ago I had to change my top radiator hose. Being a Thursday night I had to go to the local car parts place and of coruse they didnt have the necessary hose in stock. I ended up buying a hose meant for an R31 skyline. It fit perfectly with a tiny bit of shortening.
90xsi
20-09-2006, 09:39 PM
aftermarket ones are available
gates, mackey etc etc make them
go to any car automotive store and they should have them in stock
or should be able to get them.
Mr_will
21-09-2006, 05:19 PM
yeah unfortunately most places in newcastle are pretty lazy, the staff at my local supercheap are possibly the most stupid people i've ever met.
ended up just ordering a full set from the honda stealership, at least this way i know ill have everything i need, and they'll all fit.
cost $286 if anyone is interested.
cheers for the replies
destrukshn
22-09-2006, 01:39 AM
i was just about to suggest that.
which hoses did you buy to total up $286?
top, bottom, heater hoses, by pass hoses?
Mr_will
22-09-2006, 10:57 AM
every cooling related hose, top & bottom rad, both heater, bypass, and all the shitty little ones for stuff like iacv etc.
i probably couldve gotten away with it cheaper had i measured everything up and found generic parts where possible, but at least this way i know everything will fit perfectly.
Bayani
22-09-2006, 02:36 PM
Actionman, That's one awsome link. Thanks. Exactly what I've been looking for!
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.