View Full Version : help " EG dash part"
RMN15N
03-10-2006, 12:52 PM
hey yo im looking to pull this thing off
its the wall nut colored bit i was wondering if anyone knows how to take the bitch off as i need to paint it
cheers
http://carshine.com.au/Pictures/Honda%20-%20Civic%20Accessories%20-%20Richter%20Dash%20Kits%20(18476-96G).jpg
Boban
03-10-2006, 02:49 PM
^^^^yeah man, wery hard to do, be heaps easier to mask it all off and paint it on the car.
But to answer you there are 8 (yes 8) small screws you have to get to from the inside, which means pulling everything appart (Headunit, a/c controls and p/w swithces).
The screws are 4 on the left side where the A/C and HU are (2 on either side) and 4 on the other side where the power window switches are, but unless you have very very small hand and a small screwdriver (or similar) they are going to be a b!tch to undo. I gave up on mine :( Hope this helps
Alexx
03-10-2006, 03:03 PM
I needed to make a hole in that piece of trim to install a tacho (where the rear demister button is), so i thought id just take it off. I got the 4 screws on the right hand side undone then gave up on the left hand side. maybe if you had the right tools it might be ok, but yea i never got around to taking it off. i just made the hole with the trim still on. pain in the ass. As for painting it, masking it off will probably work if you take your time and do a good job. good luck with it
http://i111.photobucket.com/albums/n139/41exz/IMG_0186.jpg
RMN15N
03-10-2006, 03:20 PM
i would paint it in the car but it could get messy, as for plastic primer, black, then clear . my white interior would be stained!
i need to know exactly where the screws are?
and is there any other way to get to it?
alexx how did u get to those 4 screws? thru the dimming button?
joe...give up Lah lol...spray it in the car or leave it m8;)
honda_b_blastn
03-10-2006, 07:34 PM
haha yer bro only way to really get that piece off is to take the dash out,which will give you good access to unscrew that panel from behind..:)
incoming
03-10-2006, 07:37 PM
what others said
remove WHOLE dash
then u can get that crummy part off
*looks around...i didnt,but its an alternative lol..
RMN15N
03-10-2006, 11:15 PM
ok so i found out that there are 8 screws attached.. i know how to get to the right side 4 screws anyone know how to take out the left's side 4 screws without taking the dash out?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.