PDA

View Full Version : Uneven height


FR33K
07-10-2006, 06:09 PM
This has been driving me nuts for a week !!

iI have installed Koni yellows and I started off with all of them on the highest setting.. I used my old springs (Kmacs) which were fine and EVEN in my stock shocks...

Now with all for shocks on the highest setting i dropped the car and drove it around for a week... the front passenger side remained around 2cms higher then the driver side (rear is even)

So i took the passenger side shock out and adjusted the seat to the lowest setting (driver now highest and passenger now lowest)

dropped it and drove it around again.. but nothing barely changed !!

anyone know why the passenger side refuses to drop ???

EDIT: i also installed a whiteline rear sway bar but that wouldnt affect anything ???
ekhybrid
07-10-2006, 07:59 PM
maybe the yellows arent fully seated in the forks?
SKREMN
07-10-2006, 08:07 PM
what cha do man?
i told ya set them all up b4 you put them in
only thign i can say is the sring isnt sitting in the cup properly...
my car was dead even b4 you took them out...

there is no way you mixed up front and back springs ay?
HAHA
SKREMN
07-10-2006, 08:09 PM
maybe the yellows arent fully seated in the forks?
if they wernt funlly seated the bolt wouldnt line up with the groove therefor not allowing the bolt to pass and to be done up...
ekhybrid
07-10-2006, 08:51 PM
he's talking about the front not the rear...
ekhybrid
07-10-2006, 08:54 PM
if they wernt funlly seated the bolt wouldnt line up with the groove therefor not allowing the bolt to pass and to be done up...

that only applies to the rear not the front?
his rear is okay, its the front that isnt even
spetz
07-10-2006, 09:30 PM
Maybe swap left and right spring over?
bigjo5
07-10-2006, 11:42 PM
that only applies to the rear not the front?
his rear is okay, its the front that isnt even

i think you mis read wat he said.. cause the fork is on the front not the rear of the car.
Limbo
08-10-2006, 02:04 AM
he's talking about the front & back spring.
mixing them up
FR33K
08-10-2006, 11:34 AM
i DID NOT mix up the springs !! thats impossible coz i did one side at a time lol

im just gonna have to swap them over and see what happens
its just annoying coz the front takes longer to do then that back !
SKREMN
08-10-2006, 10:41 PM
what you gonan swop ova?
not the springs?
the rear is a bigger coil anyways so it want fit in the cup
ekhybrid
09-10-2006, 11:12 AM
i think you mis read wat he said.. cause the fork is on the front not the rear of the car.

i think you've misread my post. it was a reply to skrmn's post
FR33K
09-10-2006, 12:29 PM
what you gonan swop ova?
not the springs?
the rear is a bigger coil anyways so it want fit in the cup

swap over left to right not front to back ! lol
SKREMN
11-10-2006, 11:08 AM
how did you go?
FR33K
11-10-2006, 07:39 PM
this w/e...
FR33K
28-12-2006, 01:22 PM
2 months later ive decided to investigate..
for those that are interested.. i discovered that one of the spring seats was upside down... problem solved !
destrukshn
28-12-2006, 01:25 PM
hahahaha, 2 months?
that would of shitted me, and would of stayed up all night to fix it.
lol.
STTICH
28-12-2006, 02:12 PM
nice find tho..haha

glad its all good now :thumbsup: