What's needed to fit ITR front sway on an EK4?

[sifoo]

Hey guys as the title says .. whats needed for this to work?

Cheers

Paul

[BlitZ]

asr or beaks

[xtercii]

even for the front ones?

[BlitZ]

hahah thanks for the correction..



what size is a front ITR sway bar? I hope its bigger than my stock EM1 one...

[sifoo]

lol! yeh for the front not the rear .. i already have the asr rear

I think the ITR front sway is 26mm, correct me if im wrong.

Any suggestions on what I need to make this fit?

[BlitZ]

lol! yeh for the front not the rear .. i already have the asr rear

I think the ITR front sway is 26mm, correct me if im wrong.

Any suggestions on what I need to make this fit?


Hey Paul..
just get the EM1 one.. tis 26mm.. and its 100% guaranteed to fit:thumbsup: ..

and plus i thinkg your currenty one on ek4 is like 24 or somthing.. it isnt worth the hassle to get teh extra 2 mm..

Just try get an EM1 one.. proabably cheaper than ITR one too if u can locate one

[ekhybrid]

standard ek4 fsb is 26mm :thumbsup:

[kayot1k]

true. 26mm already no need to go larger.
ull only increase understeer

[bennjamin]

to add , with the EK having different LCA's to a DC chassis - are the end links the same ?

[sifoo]

i would be guessin the lca's are different .. so maybe the forks need to be changed?

Thanks for your input Daniel (blitz), ekhybrid .. i always thought the ek4 was smaller than the ITR/CTR front sway.

ITR/CTR = 26mm .. are you sure that the EK4 is identical?? so do the hell do ppl change it then? *confused*

[chee]

bigger front sway will have greater handling with traction but when you break traction you will plough through

[ekhybrid]

i would be guessin the lca's are different .. so maybe the forks need to be changed?

Thanks for your input Daniel (blitz), ekhybrid .. i always thought the ek4 was smaller than the ITR/CTR front sway.

ITR/CTR = 26mm .. are you sure that the EK4 is identical?? so do the hell do ppl change it then? *confused*

yeap im 101% that the ek4 is 26mm
maybe ppl who change it are GLi owners who have 22mm fsb as standard and want the beefier 26mm.

[sifoo]

thanks all - prob no point in swapping then

[sub11z]

Thanks for the classifilecation i almost got rip, they try to sell me there products which are identical.

[DOHCVTEC]

actually i think ITR is 24mm sway where as EK4s are 26mm...
someone confirm...

[n/a]

you're an idiot paul.. you car is good enough.

[sifoo]

shhh ... im just tryin to keep up with you!

[T-onedc2]

actually i think ITR is 24mm sway where as EK4s are 26mm...
someone confirm...
Yes DC2 JDM ITR 96 is 24mm at front & 22mm at rear, 98 spec is 25mm at front & 23mm at rear. AUDM has equivalent to JDM 96 spec suspension.

[nd55]

Hullo,

Honbits (Sydney) sold me a 26mm CRV front sway bar for not much $$$.

Apparently it's a straight fit into EK civics.

Havn't bolted it in yet. That's a post-chrissie holiday project.

Nick.