Abs Help

[teaseR]

I had my CV joint replaced awhile ago
now my ABS wont turn off
we jacked it up and drove it... it was fine
however when i put it back down on road its lights up


i have pulled out the battery terminals and left it over night thinking that will reset its but doesnt work....

any help???

[teaseR]

bump!!!

[ECU-MAN]

hey

the guys who changed the CV joint probably ****ed up and did not put on the pulse ring of the old joint onto the new joint.

now the ABS ECU only sees 3 wheels turning not 4 so ABS light on


http://b16a2.kicks-ass.net/tech/EF7-CV-joint025.jpg


simple fix

tap the ring of the old joint and then tap it on the new joint

if you have thrown the old joint away, then you migth be in a bit of strife

[teaseR]

nah the rings are on
cound there be anything esle??
cause the funny thing is that when its hoist up and driven its fine....

[ECU-MAN]

measure the clearence between the WSS and the ring, they should line up and have no more than 3mm cleance,

check the ABS ECU for codes

[dynosaur]

Teaser ,

listen to ECU-MAN , he is a very skillful and experienced mechanic .....

plus generous... ;p

right john ? :)

can l give a little opinoin ?

plz chack the ABS sensor clip , mayb it is not clip or connect properly.....( l guess ;p)

[Slow96GSR]

Might have pinched/cut the wires too.

[ECU-MAN]

all fixed,

turned out to be a damaged left WSS,

was open circuit. replace with another one and shes good to go.

[teaseR]

Thanks John

Feel so safe now :p