View Full Version : Where to mount an oil temp gauge in a DC2R?
Astro
21-10-2006, 11:41 AM
Hey,
Just wondering where everyone would mount/has mounted their oil temp gauge in a DC2R?
Do DC2R's have an optional apillar available like the s15's where it has a hole in it to accomodate for the gauge?
i.e.
http://img.photobucket.com/albums/v236/cool_s15/P1010001_small.jpg
Just hoping for a neat and non-dodgy looking way to mount the guage.
Thanks
Slow96GSR
21-10-2006, 01:20 PM
Ummm ya! There are a few options.
1: A-pillar (http://cgi.ebay.com/ebaymotors/GRAY-94-99-INTEGRA-TRIPLE-GAUGE-PILLAR-POD-95-96-97-98_W0QQitemZ250039190542QQihZ015QQcategoryZ46100QQ rdZ1QQcmdZViewItem)
2: Gauge bezel in dash (http://cgi.ebay.com/ebaymotors/OBX-94-01-Acura-Integra-LS-RS-GS-GSR-Gauge-Bezel-Pod_W0QQitemZ170039945457QQihZ007QQcategoryZ33677Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)
3: Custom fab'd (http://www.strathlan.com/CMS/viewtopic.php?t=11)
There are a few others but those are the popular ones.
TAM R
21-10-2006, 02:00 PM
slightly off topic but where can you get one of these?
http://i135.photobucket.com/albums/q153/dc2r888/badhbt09.jpg
Astro
21-10-2006, 02:17 PM
Ummm ya! There are a few options.
1: A-pillar (http://cgi.ebay.com/ebaymotors/GRAY-94-99-INTEGRA-TRIPLE-GAUGE-PILLAR-POD-95-96-97-98_W0QQitemZ250039190542QQihZ015QQcategoryZ46100QQ rdZ1QQcmdZViewItem)
2: Gauge bezel in dash (http://cgi.ebay.com/ebaymotors/OBX-94-01-Acura-Integra-LS-RS-GS-GSR-Gauge-Bezel-Pod_W0QQitemZ170039945457QQihZ007QQcategoryZ33677Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)
3: Custom fab'd (http://www.strathlan.com/CMS/viewtopic.php?t=11)
There are a few others but those are the popular ones.
The Apillar one seems good.
However, don't the come in with one 1 gauge hole? I don't really need 3..hehe.
Slow96GSR
21-10-2006, 02:48 PM
slightly off topic but where can you get one of these?
http://i135.photobucket.com/albums/q153/dc2r888/badhbt09.jpg
Ebay or any shop down there can order them.
-------------------------------------
However, don't the come in with one 1 gauge hole? I don't really need 3..hehe.
The Apillar one seems good.
You can get them with 1, 2, or 3.
TAM R
21-10-2006, 04:46 PM
Ebay or any shop down there can order them.
-------------------------------------
You can get them with 1, 2, or 3.
is there a particular name for that item?
LAGOOT
21-10-2006, 04:50 PM
slightly off topic but where can you get one of these?
http://i135.photobucket.com/albums/q153/dc2r888/badhbt09.jpg
JDMyard should be able to sort you out there mate :thumbsup:
in answer to paul's question, have you considered steering column?
Slow96GSR
21-10-2006, 04:55 PM
Well on Ebay (http://motors.search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&catref=C6&fcl=3&from=R10&mppfqy=integra+gauge&mppfqy=integra+gauge&mppfqy=integra+mount&satitle=integra+gauge+pod&sacat=6030%26catref%3DC6&fmmk=&fmmd=&fylo=&fyhi=&mppfqy=integra+gauge+mount&sargn=-1%26saslc%3D2&sadis=200&fpos=80962&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1%26fsoo%3D1&coaction=compare&copagenum=1&coentrypage=search) I just enter "integra gauge pod" and see what pops up. If you can't get a single pillar pod I can, just PM me for more info on that. Also they have ones you mount to the stock pillar and ones that come molded in to the pillar for a more stock look. The ones you mount don't always like to stay mounted if you follow their instructions and use their materials, I normally have to use small bolts to connect the two together.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.