Removing cluster from dc2r

[JeremyCivic]

hey,

just wondering how do I remove my cluster from my dc2r?

If someone could give me a quick how-to, that'd be great.

thanks

[destrukshn]

the surround should be a couple of screws, top and bottom, probably 4 of em.
take out the plastic surround, and then your cluster should be exposed, then your cluster should only be held by 4 screws/10mm bolts.

this is takin a guess, as i've only seen the dc2's interior, never taken it apart.

[bungsai]

Two screws (phillips head) at the top of the front bezel.

http://img.photobucket.com/albums/v695/bungsai/IMGP1759.jpg

i know this is a civic, but its similar to an integra so im using it for display purposes. The two screws are located around the middle of the front bezel and at the top.

Undo these two screws then you can just pull the front bezel out.

Then there are 3 screws on the actual cluster. You can see the holes in the pic below.

http://img.photobucket.com/albums/v695/bungsai/mini-R0014799.jpg

One on the bottom right, one on the bottom left and one in the middle at the top.

Undo these three screws and slowly pull the cluster out.

Be careful with it, its valuable.

Unclib the three big green plugs at the back and you should be able to totally remove it. Let me know if it doesnt work

Matt

[wlee2]

This was a write up on changing the bulbs in the cluster but the process is the same..

http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=313

[JeremyCivic]

ok - thanks guys, its done.

can be closed.. :)