Front end conversion on EG

[civ_sik]

hi,

basically im thinking of putting an ek front end on to my eg...
whats involved?
hows is it done? custom bonnet and guards?
radiator support?

thanks

[Nuttz]

well i think this question has been asked before so a search will help you.

but bassically.. u need to weld on EK radiator support
cut quarter panels above wheel well to join EK panels to EG panels
and the rest is bolt on :)

[marte]

yeah search it its been done. if your going to do it make sure you do the face lift model :O

[civ_sik]

i am fuly aware its been done, jus no where on here says whats involved which was actually my question ffs.

[civ_sik]

well i think this question has been asked before so a search will help you.

but bassically.. u need to weld on EK radiator support
cut quarter panels above wheel well to join EK panels to EG panels
and the rest is bolt on :)

thanks

[JasonGilholme]

Might wanna check on Honda-Tech bro.

Theres a few people on there that have done it to an EG Del Sol.

[tRipitaka]

as stated,

you'll need the EK bonnet, headlights, grille, bumper, radiator support and fenders.

take all the panels off on the EG..
bolt the headlights/bonnet on.. then line up the fenders with the lights/bonnet, and cut/weld with the EG fenders..

weld new radiator support..

and everything should be bolt on from there..

the hardest thing would probably be the welding of the fenders, as you have to get this one perfect, or there'll be problems involved..

good luck, and have fun :)

EDIT:
i remember seeing a DIY on cardomain.. but don't have the link..

[civ_sik]

thanks heaps man ^ ill have a look