Identifiyng a Bseries GearBox when the sticker has peeled of:(

[locote]

How would i go a bout finding out exactly what gearbox i have as i wanna get a after market LSD for it and i wanna make sure it fits...
Is there any munbers stamped anywhere in the casting and where bouts..

[tinkerbell]

what is the origin of the 'box?

[turtleEK1]

i think there should be a stamp above the g/box filler plug... you should be able to identify it by using that...

eg. i know a d16y8 box has 'Pa4/b000'

its a round stamp...

[locote]

Its of a imported civic front cut..
not sure wether it has a 4.4 or 4.2 ratio...
As the vtir civic has a 4.2 ratio

[ekhybrid]

civic vti-r is 4.4

[[[d a n n y]]]

VTIR is 4.2
the 96spec type R is 4.4
also the CTR is 4.4

[VT3C]

yes listen to [danny].. FYI EG6 has 4.4.. 98+ spec ITR is 4.7

to test it.. get on your local freeway or highway and sit at 100KM/Hr in 4th gear and look at your RPM.. if you're at 4,400RPM.. bingo you got 4.4FD.. if you sitting at 4,700RPM or higher throw a party :)

[ekhybrid]

]']VTIR is 4.2
the 96spec type R is 4.4
also the CTR is 4.4

VTi-R is 4.4 buddy :)
same box as ctr but with no lsd

http://www.honda.com.au/wps/wcm/resources/file/eba26d0e278e302/Civic_Coupe_Specs_May99.pdf

[CUL8R]

or do a max speed run on ur private track lol

[XB-16-AX]

ok .. well i dont know what kind of g/box ive got coz the sticker label is gone. . its a B16A OBD1 from EG6 SiRII with cable g/box.

when im on 5th gear sitting on 100klms the RPM shows 2600rpm.

havent tried on 4th gear.

anyone can help on this?

[sivic]

try it in 4th then come back with the results. 4th gear is closest to a ratio of one so it gives a closer reading as to what the final drive is.

[locote]

its a 4.4 for sure.
But i still need to know whether all JDM B16a civics came wth same box and what is the part number of it.