Aftermarket Fuel Pumps For da9

[Cold Fusion]

hey i was wondering about after market fuel pumps for our tegras! in the traders section someone was selling walbro pumps but he has none for the da9 and i went to an automotive place and they didn't have any either.

what am i gonna do! has anyone got one? how much do they retail and stuff like that?

thanks

[Steer^Gimic]

a walbro 255 will fit. they arent really model specific. they fit a whole range of cars. all it really needs to do is fit in the cradle. a friend of mine has one in his bluebird...yes, bluebird. another has one in his eg civic...go figure!

[Cold Fusion]

as i was talking to EG5 who is the trader, he told me that they don't fit my da9...could it just be that he doesnt have manual for it? or do u rekocn it cant fit :S

[CRXer]

The walbros come with installation kits for your car,its the same as my crx.

U got 3 choices

1. 190lph GSS-278
2. 255lph GSS-315
3. 255lph HP GSS-341

The install kit your after is the 400-965

So for eg, if u want the 255lph HP then u order GSS-341-400-965

They go for about $190 & watch out for the cheap ebay copies,they are bad news.

Dont forget u have to drop the whole fuel tank out to replace the pump in the DA not like those sneaky DC bastards who have the little access hatch.

[SKREMN]

wjy do you need a new fule pump?
I have got a stock second hand one?

I had the stock pump running my b20 vtec with 550 cc injectors, it didnt need to be changed

[CRXer]

wjy do you need a new fule pump?
I have got a stock second hand one?

I had the stock pump running my b20 vtec with 550 cc injectors, it didnt need to be changed

Good point,dont go chasing ponies with a higher rated pump,match it to your setup, your large injectors would of been takin some of the strain off the stock pump on the B20,however.

Somethin else to consider as well is the increased noise of the walbro,its not horrific but its there & gets noisier if u start tryin to turn up the flow.

[Cold Fusion]

im getting stage 2 cams and cam gears and stuff going in soon, will i need a new fuel pump? or just maybe a fuel pressure regulator and some injectors???

[SKREMN]

firstly get the FPR and go from threre
possibly may need injectors
but when your on the dyno you will know all this

[EG5]

as i was talking to EG5 who is the trader, he told me that they don't fit my da9...could it just be that he doesnt have manual for it? or do u rekocn it cant fit :S

The one that i got in stock is not what you want for your Da integra.
PM sent anyway