View Full Version : B16A2 Swapped EGs: Whats driveshafts you using?
im having troubles with my driveshafts ie. breaking them.
what are you guys using? i have an EG5 Civic/DA9 Teg combo, is that working for anyone else? what are other ppl using?
SLOWEGG
03-12-2006, 06:13 PM
Im using B-series ones, havent had problem yet.
just curious, what part of the shaft is breaking?
Im using B-series ones, havent had problem yet.
more info? ur using the whole shaft out of a b series car?
breakin the shaft
[[d a n n y]]
03-12-2006, 07:57 PM
just EG6 shafts
stockers they seem to work very well for me.
SLOWEGG
03-12-2006, 08:19 PM
more info? ur using the whole shaft out of a b series car?
breakin the shaft
Uhuh, im using the whole drive shaft from an eg6. Im pretty sure you can use DC2 aswell or any other B-series ones.
really? ill have to check it out, thanks :thumbsup:
Eclipsor
03-12-2006, 10:00 PM
Is the eg6 different to the audm del sol shafts? Cuz that didn't work did it?
i never had eg2 ones to try cam :thumbdwn:
Eclipsor
03-12-2006, 10:04 PM
oh that's right. They were your originals hey. Don't mind me. Carry on. Just steal jasons. :D
bennjamin
03-12-2006, 10:06 PM
any B series entire shafts suited to EG6/DC2/DC4 should work fine Trav.
I have DC2ITR ones in mine - work 100% fine.
The problem is that your car is too low...THAT breaks drive shafts prematurely :)
Chris_F
03-12-2006, 10:41 PM
^ hehe that's what i said... it's the price you pay for being that low
z3lda
03-12-2006, 10:42 PM
any B series entire shafts suited to EG6/DC2/DC4 should work fine Trav.
I have DC2ITR ones in mine - work 100% fine.
The problem is that your car is too low...THAT breaks drive shafts prematurely :)
lowest got nothind do do with breakin drive shafts
mines been low for 2 years , 40-50mm off the ground
fatboyz39
04-12-2006, 07:15 AM
wouldn't you be using b-series driveshaft in the first place?
I also use b-series shafts.
any B series entire shafts suited to EG6/DC2/DC4 should work fine Trav.
I have DC2ITR ones in mine - work 100% fine.
The problem is that your car is too low...THAT breaks drive shafts prematurely :)
lol is there ever too low? ;)
thanks ben, ill try some of them :thumbsup:
+rep
JasonGilholme
04-12-2006, 08:26 AM
Hands of my drive shafts pal!!! ;)
What about that crx at boss??? You know you want the crx shafts man ;)
Hands of my drive shafts pal!!! ;)
What about that crx at boss??? You know you want the crx shafts man ;)
**** boss, they wont send em to me :thumbdwn: i dont think they r intact anyways.
wouldn't you be using b-series driveshaft in the first place?
I also use b-series shafts.
half and half man, things u do to get shit goin when its late
JasonGilholme
04-12-2006, 08:47 AM
I can pick em up for ya man. They're only down the road from me.
Southside yO!
CRXer
04-12-2006, 10:49 PM
things u do to get shit goin when its late
i hear ya dude
wtf r u doin to them??? its a fairly stock B16 atm isnt it?
im runnin B shafts with crx outers & 205/17's hooked to a B18,i know its not the same car but mine are still goin strong after 6 months,copped a fair bit of abuse too.
Are u wheel hoppin or something?
U got me thinkin bout ordering a spare set.....
Snoop_gee
05-12-2006, 09:35 AM
HASPORT offer very good driveshaft complete with HP(horse power) ratings in which what they can handle.
Stage 1
Stage 2
Stage 3
sure it cost that extra bit more but seriously its worth it. Of course stage 1 wouldnt be teh best choice from wat i hear.
Click here (http://hasport.com/)- Official HASPORT website then click buy direct!
http://www.hasport.com/Products/Axles/afbaxcomp.jpg
JasonGilholme
05-12-2006, 09:46 AM
Hasport FTW!
TRAV: I'll go you halves in a set of those for my car and you can have my OEM Shafts ;)
thanks for all the help guys really appreciate it, i can source my own billet shafts. i will not buy from hasport tho :thumbdwn:
yeah fairly stock man :p
bennjamin
05-12-2006, 08:04 PM
lowest got nothind do do with breakin drive shafts
mines been low for 2 years , 40-50mm off the ground
it can be a very big factor. Maybe not JUST being low , but other issues as well putting extra strain on the shafts. Its a common bitch n moan from "low" US boys on Honda-tech etc.
[[d a n n y]]
05-12-2006, 08:06 PM
dont think breaking shafts comes into the lowness it's more like CV boots ripping.
just IMO dont quote me though
bennjamin
05-12-2006, 08:10 PM
];998297']dont think breaking shafts comes into the lowness it's more like CV boots ripping.
just IMO dont quote me though
one thing leads to another duh :wave:
Travvv
I'm using ITR shafts with the original Del-Sol intermediate.
my car is very low also and havnt had any troubles.
I know that the RHS D-series one will fit but it's not balanced for use with the equal-length shafts nor to handle the 30-40 more PS.
thanks for that guys :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.