View Full Version : Help My Bonnet!!
blazin206
03-12-2006, 09:31 PM
Sorry guys but i really need some advice!!
Just realised my bonnet is not sitting straight when its closed.
appears the right front just above the headlight is sticking like half a cm up.
When I apply pressure to push it down seems the left sticks up.
Would anyone know why this has happened?
AND WHAT I CAN DO TO GET IT STRAIGHT?
phantom_civic
03-12-2006, 09:37 PM
On your radiator support, there should be 2 rubber pieces that look like a tower one on each side.
Twist them up to raise and down to drop and make sure the level is even.
Then adjust to suit ur viewing.
Attachments.
\http://www.geekimages.com/public/thumb_4572b7d49b790378593411.jpg (http://www.geekimages.com/public/pview/1338/twist.JPG)
Hope this helps.
John
blazin206
04-12-2006, 09:12 PM
Hey thanks for the tip John.
When I got home from work I had a look at those rubber mounts and they appear to be straight.
I poped the bonnet and this is what it looked like so i doubt it had anything to do with the rubber mounts.
On a closer look
heres left
http://i134.photobucket.com/albums/q103/blazin206/04122006096.jpg
and heres right
http://i134.photobucket.com/albums/q103/blazin206/04122006097.jpg
So I thought what the heck!!! I lifted the bonnet up and held the left side of bonnet and asked my gf to push down on right side.
ANd here is the end result after i closed the bonnet!!
http://i134.photobucket.com/albums/q103/blazin206/04122006101.jpg
Not too bad eh!!
Now it sits perfectly and air tight!!:thumbsup:
My conclusion is bonnet prob got bent when it was leaning on the stick that holds it up
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.