View Full Version : stud patten???
i am getting confuised, i own a 93 integra vtir, is the stud patten 4x100 or 4x114.3??
also when i buying wheels, not so clear about the offset thing, can someone explain it to me?
skoota
03-06-2004, 08:04 PM
I think that was the year the DC2's came out? Anywho, I'm 99.999% sure your stud pattern is 4x100.
4x100 as integra wheels fit on civics! (excluding dc5)
i am getting confuised, i own a 93 integra vtir, is the stud patten 4x100 or 4x114.3??
also when i buying wheels, not so clear about the offset thing, can someone explain it to me?
I believe the JDM version is 4x114.3
ok this is getting confusing...:p
i'm sure it's 4x100 and offset of +42 for your car
joneblaze
03-06-2004, 11:11 PM
AUSDM DC2 pattern is 4 x 100. (are JDM DC2's really 4 x 114.3? I thought only the '96 JDM DC2R was...)
For offset explaination, read this:
http://www.tirerack.com/wheels/tech/offset.htm
or search a little more. It's quite simple once you get your head around it! :)
If he has a JDM model, he wouldn't of called it a VTiR, instead a SiR :P
A'PEXi
04-06-2004, 12:01 AM
depending on what wheels you buy, there is normally a guide for that type of wheel + the stud pattern that fits as well as the offest..... they could be wrong sometimes tho :P
tanghy
04-06-2004, 12:14 AM
93 integra is 4x100 CONFIRMED
doen'st matter if it's audm or jdm or usdm
Thank you very much for all u help :)
So when does it change to 5 stud? 96 spec type R use 4x114.3?
tanghy
04-06-2004, 02:07 PM
96 type r use 4x114.3 TYPE R ONLY
VTIR GSI remain same
98 type R use 5x114.3
bennjamin
04-06-2004, 06:09 PM
Answered.
:)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.