b18c5 with spoon h/gkts

[hytec]

is anyone runnig toda b with spoon head gask. on a b18c5 im trying to dial the cams in
whats the best way to dial them in ?
thanks

[ECU-MAN]

dyno !!!!!

[ALLMTR996]

is anyone runnig toda b with spoon head gask. on a b18c5 im trying to dial the cams in
whats the best way to dial them in ?
thanks

E-mail Toda AU he has the correct settings for these cams.
ALLMTR996

[TODA AU]

is anyone runnig toda b with spoon head gask. on a b18c5 im trying to dial the cams in
whats the best way to dial them in ?
thanks

Use dial indicator & TDC guage.
Rotating in anti clockwise direction set low cam lift to 1mm @ TDC
Valve lash must be 0.2mm (Measured between valve & rocker)
This will give 102.5deg LCA datum point.
Mark your cam pulleys at this, as this is your new zero.
FWIW: Playing on the dyno will not be as acurate
Further, to finally arrive at the ideal position will cost more than setting it correctly.

[hytec]

do you dial the cams in with 0 lash?
thanks for the help

[TODA AU]

do you dial the cams in with 0 lash?
thanks for the help
No...
In any case, the valve lash set must be per cam manufacturer spec.