main relay??? pics??

[honda_boy_3000]

does anybody have pics of where and what the the main relay is and looks like? i cant get the p[ics in thge diy post to load up.!!! if so can yau please please email it to me? honda_boy_3000@hotmail.com any help would be grateley appricheated!!!

[SKREMN]

ok what car?
its a brown box under the drivers side dash
i have a spare if its gone?

[ECU-MAN]

do they load up for you now ????

[VT3C]

pics of the PGMFi Main relay on EG please anyone ??

[ECU-MAN]

as on the 1st page..


the pics always work for me, are they working for you or what ????

[VT3C]

cant see no pics.. nor any red x's.. this IS the 1st page ? :(

[schanmala]

no pics for mee too :(

[ECU-MAN]

I think I fixed the pics now, can you tell me if they work fir you now ?

[bennjamin]

pix no worky John. Where did u host it ? re upload ?

[ECU-MAN]

try refreshing da page, clt F5 style

[bennjamin]

your computer is a freak Sir. No work here still.

Since it isent working - here is a good informative site on MAIN RELAYS

http://techauto.te.funpic.org/mainrelay.php

Also here is a pic


92, 93, 94 and 95 Civic Main Relay Removal Procedure

http://techauto.te.funpic.org/images/relaylocationciv.gif A main relay should look like this http://techauto.te.funpic.org/images/rlg.gif

or this. http://techauto.te.funpic.org/mitsuba.gif

The main relay is to the left of the fuse box, wedged up against the left above the hood latch in a tight spot.

Remove the coin box (for a better view.)
With a 10 mm socket or wrench., reach deep inside and at the top of the relay there you will feel a bolt.
Unbolt it. (If you cannot unbolt then you may dislodge the relay from the the steel tab using a large flat head screw driver.)
If you damage the tab, you may be able to flatten the tab back to shape.
Bring the relay down and unplug the connector by squeezing the locking tab then separate the connector from the relay.
See installation at the bottom of this page.