View Full Version : REV LIMIT FOR GLI/CXI?
CWAZI
09-06-2004, 12:36 PM
i had just test drove a gli/cxi civic yesterday and noticed there was no rev meter :?: ... can anybody tell me when redline starts cuz i'm going to have to fit a aftermarket rev meter. Also is it possible to fit the vtir speedo display which consist of the rev meter?
thanx
[[d a n n y]]
09-06-2004, 12:45 PM
yeap it is posstible ..
but i am pretty sure...
the d serise engines cut out at 7.5 ?
i think
nobbs
09-06-2004, 01:00 PM
assuming that you are talking about an EK model, the gli does bring a rev meter but not the cxi, i have a gli and the redline is at 6800rpm
the whole rev meter goes up to 8000rpm on the gli model and the vtir model goes to 9000rpm
SIKCVC
09-06-2004, 01:11 PM
the whole rev meter goes up to 8000rpm on the gli model and the vtir model goes to 9000rpm
****ed if it means anything on a stock engine, VTiRs only make power to around 8100 then it drops off, Thats before redline, so why rev past it :P.
CAT_SPEW
09-06-2004, 01:26 PM
the whole rev meter goes up to 8000rpm on the gli model and the vtir model goes to 9000rpm
****ed if it means anything on a stock engine, VTiRs only make power to around 8100 then it drops off, Thats before redline, so why rev past it :P.
So you are sure to be in VTEC when you change gears ;)
Lol, na I dunno some people just like to rev the shit outta their cars :P
nobbs
09-06-2004, 03:06 PM
dude i was just letting CWAZI know seeing as there is a difference between the 2
im not saying its best to rev your car to 9000rpm.....
SIKCVC
09-06-2004, 03:13 PM
ohh sorry :P
and yeah sometimes drops out of vtec if you shift at like 75
fozee
09-06-2004, 06:22 PM
nobbs is spot on.
GLi has a Tach, redline around 6800 RPM.
I redlined my HB today and it didnt go any further than 7100 before dying in the arse.
I dont rev the shit out of my engine i just use every bit of power as i can.
A'PEXi
09-06-2004, 11:10 PM
yeh im pretty sure its around 7k mark
since we're kinda on the topic, why is it the Gli gets a tacho and not the CXi?? Bearing in mind the EK models here. :)
vtecinaccord
10-06-2004, 10:04 AM
Ahh well Toe the Cxi doesnt get a tacho because its the "BASE" model.
If u want to intall a tach... then...
pop your hood, towards the upper left next to the clutch reservoir there is a bunch of wires. The blue one with the adapter head is the one for tacho...
Buy a tacho kit from Jaycar or somthing and then use your imagination :)
But to be honest... why in the world do you want to know the rev limit for a Cxi? U wanna drag someone or somthing?
CWAZI
10-06-2004, 12:39 PM
thanx for ur replies... i wanted to know the rev limit just to be on the safe side if i do get a drag or something...
but yer thats pretty gey to not include a rev meter tacho for a manual car.
since the gli models came out with a tacho included could a just source a speedo from one of those and swap it over with out cutting or adding wires?
vtecinaccord
10-06-2004, 12:47 PM
Yes that is true and will work all the wiring should be there ready to go.
Ahh well Toe the Cxi doesnt get a tacho because its the "BASE" model.
is dat all there is to it?? Because it's a base model?? kinda hard to believe... :(
I called up some wreckers looking for a new set of gauges for my cxi, and i was basically told its a shitload of work (involving changing harnesses/wiring etc). But I had a slight inclination this was a crock.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.