PDA

View Full Version : Removing dents


Kazaf
27-12-2006, 08:49 PM
I've got 2 small dents on my bonnet cause by a fist.
Is there an easy method to fix this?

ding king do the trick?
aaronng
27-12-2006, 09:22 PM
Any paintless dent removal specialist will be able to help you. If it is over the reinforcement rib that is under the bonnet skin, then they might have to pull instead of push out.
Kazaf
27-12-2006, 09:26 PM
How much would dent removal specialists charge for a simple small dent?
Zilli
27-12-2006, 10:37 PM
between 30 and 60 for a simplee dent

if its on a crease line or if its tricky it gets more expensive
Ru$kI
28-12-2006, 12:31 AM
zilli...you know of any good places in Sydney that do this stuff...im interested in getting a few dents in the doors removed as well
Kazaf
28-12-2006, 12:35 AM
zilli...you know of any good places in Sydney that do this stuff...im interested in getting a few dents in the doors removed as well

http://www.ozhonda.com/forum/showthread.php?t=58246

Are there like methods to easily DIY the dent removal?
And how good are these mobile dent removal specialists? I've never actually used these services, do they remove the dent completely, like new? like nothing had happened?
EuroDude
28-12-2006, 01:27 AM
Ding King For The Win
http://www.asseenontv.com/prod-pages/ding_king.html
aaronng
28-12-2006, 09:25 AM
The best would be paintless dent removal. The good guys can get it back to 99% perfect. But there are areas where PDR can't get to...
Kazaf
28-12-2006, 03:45 PM
Recommend any PDR's Aaron?
chicken8
28-12-2006, 04:02 PM
other forums do paintless dent removal days where they meet at someones house for a BBQ while the PDR guys get to work. it works out cheap for everyone as its like $400 a day for a mobile PDR dude and he can work on at least 10 cars that day and take out all the dents

too bad you can't do group buys on ozhonda
EK4R
28-12-2006, 04:29 PM
Ding King For The Win
http://www.asseenontv.com/prod-pages/ding_king.html

who has one of thesE???
Kazaf
28-12-2006, 04:46 PM
who has one of thesE???

True, borrow these and we have our own meet
aaronng
28-12-2006, 05:28 PM
The one I used was through the dealer (they caused the dents on my front fender). I think it was Magic Dent or something similar.
EK4R
28-12-2006, 05:31 PM
^^ how it go? came out nice like new? easy to use?
aaronng
28-12-2006, 06:13 PM
They removed the wheel arch liner and pushed the dents out from the inside using a roller tool. One dent was at the crease, and they managed to fix that good too. Dentwizard/dentking/dentmagic/dentures, as long as they are certified PDRs, they should be ok. Better than any panel beater who can't get even the tiniest of dents out without scratching your paint to hell.