PDA

View Full Version : How can u tell if the coilovers go low ?



jdm_kid
27-12-2006, 10:37 PM
just a question
how can u tell how low the coilovers can go just by looking at a pic or at them? i had no luck finding info on them on the internet so yah lol

philBo
28-12-2006, 12:26 AM
not sure you can tell that just from a pic. what coilovers are you looking at? maybe if u post up what ur looking at then someone could help you out with some info.

tRipitaka
28-12-2006, 08:58 AM
http://bag05pr000.ac.yahoo.co.jp/users/9/9/0/3/maabo1978-imgbatch_1159951902/600x450-2006100400033.jpg

the distance between the thread and the bottom of the coilover (where it connects to the LCA) is an indication of how low it goes..
the shorter that distance, the lower the coilover can go..

because the thread determines how far you can twist that purple thing down.. hence lowering the ride and travel of the shock

VTi_b0i
28-12-2006, 09:00 AM
yeahh u can tell by how long the thread goes for...

jdm_kid
28-12-2006, 09:03 AM
not sure you can tell that just from a pic. what coilovers are you looking at? maybe if u post up what ur looking at then someone could help you out with some info.

Mugen N1 Coilovers ..

http://img362.imageshack.us/img362/6237/image2wu2.jpg

VTi_b0i
28-12-2006, 09:05 AM
well the springs are tiny as! if u go all the way to the bottom, the spring wont touch the top? and couldnt the spring fall out?

aaronng
28-12-2006, 09:27 AM
The mount section at the top also goes down when you have the car's weight on it. The only worry about the N1 is the lack of damper travel if it is set too low. The HKS seems to have lots of damper travel

tRipitaka
28-12-2006, 09:29 AM
The mount section at the top also goes down when you have the car's weight on it. The only worry about the N1 is the lack of damper travel if it is set too low. The HKS seems to have lots of damper travel

yep, looks like you'll be bottoming out alot if you set them at the lowest setting..

STTICH
29-12-2006, 11:58 AM
http://img226.imageshack.us/img226/8025/image2wu2ark4.jpg

the N1 is a fully adjustable coilovers, as in u can adjust the height by moving the whole suspension body up/down, wthout adjusting the spring perch. to do tat just losen the lower perch (yellow arrow), depending on how long is the suspension body (pink) and how much empthy space there is for adjustment (light blue), u can adjust the height without affecting suspension travel. tat shud b the right way to do it i suppose, as the springs are short, lowering the spring perch might not b ideal.

HKS only allows u to adjust the spring perch and not the entire body. wth N1, u cant really tell how low it can go, u really hav to look at it in person, or speak to somone tat owns it to estimate the max drop.

hope my silly diagram and explaination is understandable :)

bigjo5
30-12-2006, 01:58 PM
^ exactly what stitch said.