PDA

View Full Version : need advice: EG/EK4 enquiries


siir
02-01-2007, 12:46 PM
got few questions guys

1. will DC2R zorst (muffler) fit to EH sedan?? providing the axle is modified?
2. wil EK front seats fits EH sedan?
3. Wut is the main difference for EK vti and gli beside the vtec??


thx ppl :thumbsup:
bennjamin
02-01-2007, 12:52 PM
1. Yes (with modding)
2.With EK rails , No. Ek rails are 25% different to EG rails ( inner corner bolt is slightly off)
3. Nothing really...options ?
[[d a n n y]]
02-01-2007, 01:40 PM
3. front and rear sway bars?
especially rear?
nugget666
02-01-2007, 01:43 PM
http://www.carsales.com.au/car-research/details.aspx?Model=CIVIC&__N=4294965322+4294965250+4294922465+281&__sid=10FE34505EC6&seot=20&__Nne=20&silo=1005&Make=HONDA&Cr=3&trecs=9&R=cs19951017.14:50:02&__Ns=pCar_YearMade_Int32|1||pCar_Make_String|0||pC ar_Model_String|0


http://www.carsales.com.au/car-research/details.aspx?Model=CIVIC&__N=4294965322+4294965250+4294922341+281&__sid=10FE34505EC6&seot=20&__Nne=20&silo=1005&Make=HONDA&Cr=2&trecs=10&R=cs19960226.12:13:23&__Ns=pCar_YearMade_Int32|1||pCar_Make_String|0||pC ar_Model_String|0



looking at that i saw vti has 185 gli has 175 tyres and "joint-mounted anti-roll bar" on the rear. about all the diffrence
[[d a n n y]]
02-01-2007, 01:45 PM
hm.. not too sure on EK's in genearl but i think the VTi's have rear sway bars and GLi's dont
afterall it's the top model of the EK sedans so it should have it that's my guess
twing
02-01-2007, 01:48 PM
3. Wut is the main difference for EK vti and gli beside the vtec??
vti has ABS,cup holders, center console as well
Only EK VTi-r that has rear sway bar (EK4 and EM1).
[[d a n n y]]
02-01-2007, 01:51 PM
3. Wut is the main difference for EK vti and gli beside the vtec??
vti has ABS,cup holders, center console as well
Only EK VTi-r that has rear sway bar (EK4 and EM1).
cheers for the verification
siir
02-01-2007, 02:09 PM
aight.. thanx for da info guys.. very quick response..:P
siir
02-01-2007, 02:11 PM
[QUOTE=bennjamin;1022039]

1. Yes (with modding)

hey Ben, wut u mean by modding??
just the axle or including the tip??
siir
02-01-2007, 02:14 PM
anybody know the measurement for DC2R muffler?
or if anyone had a conversion installed to eg9/eh sedan? any info is beneficial :)
coz im not sure about the measurement for the muffler - just incase if its going to hit the swaybar,etc..

thx yo :)
incoming
02-01-2007, 02:40 PM
2. swap the EG rails onto the EK seats
my mate has EK4 seats in his EG(EH) sedan
siir
02-01-2007, 02:44 PM
2. swap the EG rails onto the EK seats
my mate has EK4 seats in his EG(EH) sedan

sweetz thx man :):thumbsup: