Spring rate for king springs low

[vteccoupe]

for the above...ani1 noe watz the spring rates? its on a dc2

[bennjamin]

I cant say the exact rates , but King springs are soft...probably as soft just lowered stock rates IMO

According to their website



Example:


Original Spring Rate 120lb/"
Heavy Duty Linear Spring Rate 160lb/"
King Performance Progressive Spring Rate 130lb/" to 200lb/"

[V_tec 4 life]

i have king springs on my car and they feel pretty much bout the same as a dc2r its quite smooth for how low they are i dont know how super lows would feel :S

[gambate]

What is the different between: (spring rate? ride height?)
KHFL-67 and KHRL-68 for integra 93-01, Civic EK EJ EM 95-00
and
KHFL-58A and KHRL-59 for Civic EG EH 91-95

I bought KHFL -67 and 68 from the above owner thinking it fit into the EG, because i always thought EGs and DCs suspension are interchangable, not EKs and DCs?!?

and from the L in KHFL or KHRL, its a "low spring" instead of "super low"?
http://www.kingsprings.com/kings_master_catalogue.pdf

[ekhybrid]

from memory they were around

front 235lb
rear 180lb

[BluEG]

king spring lows for eg = super lows for dc2/4
king spring super lows for eg = ultra lows for dc2/4

front (EG super lows) = KHFL58ASL

rear (EG super lows) = KHRL59SL

if you take the SL of the part number they just become low springs

[ekhybrid]

if you take the SL of the part number they just become low springs

WAH MAN, YoU SERIOUS??????

[kn1ghtm4r3]

good stuff guys =)

[BluEG]

and from the L in KHFL or KHRL, its a "low spring" instead of "super low"?
http://www.kingsprings.com/kings_master_catalogue.pdf

:zip:

[ekhybrid]

damn
i thinks the SL was for Sick Look not super low

[aaronng]

from memory they were around

front 235lb
rear 180lb

In our units, that's:
front 4.2 kg/mm
rear 3.2 kg/mm

That's ULTRA SOFT. Similar to stock spring rates.

[gambate]

king spring lows for eg = super lows for dc2/4
king spring super lows for eg = ultra lows for dc2/4

front (EG super lows) = KHFL58ASL

rear (EG super lows) = KHRL59SL

if you take the SL of the part number they just become low springs

oh crap. now i know why my EG is higher with the stock ITR suss..

[Moya]

In our units, that's:
front 4.2 kg/mm
rear 3.2 kg/mm

That's ULTRA SOFT. Similar to stock spring rates.

What are the spring rates for stock DC2R suspension?

[SiReal]

thats funny cos i did a search on spring rates for dc2r

its front is same-ish, rear is even softer than kings.

http://www.ozhonda.com/forum/showthread.php?t=66348&highlight=spring+rate+dc2

i think alot to do with the performance is obviously the shocks being used...

[Moya]

Shocks will be DC2R Shocks.

96 spec F=4.4 R=2.5to4.4

What does "R, 2.5 to 4.4" mean? I've never seen Rear spring rates quoted in "from x to y"

[bennjamin]

might be progressive rates.
IE 2.5 kg/mm static or light load but when cornering etc they become 4.4kg/mm max