93-95 Honda Civic Instrumentals

[trdrz]

.......

[egSi]

im pretty sure only JDM/EDM EG6s came with them, not optioned AUDM egs but im not 100%

[trdrz]

.......

[incoming]

speedo = 180km/h?

[trdrz]

.......

[bennjamin]

sounds like aftermarket "face".
AUDM did not come with the face you describe.

[incoming]

its an aftermarket one i guess
does it glow blue/green at night?

[trdrz]

.......

[egSi]

red needles or white?

[trdrz]

.......

[blk_shadow]

im pretty sure only JDM/EDM EG6s came with them, not optioned AUDM egs but im not 100%

or EG9?

[RIVAL]

maybe the person bought an aftermarket one and put it on??

[Zdster]

Just for your information, instrumetals = gauge cluster :).

[CivicSi]

I've never seen them in stock white dials.... but i've had a look around and there is heaps of aftermarket white gauge clusters but none that look the same as the genuine ones... If it's not an imported car i guess they would probably be aftermarket

[trdrz]

.......

[bennjamin]

Cheers for that!

So Honda never offered white gauge clusters as a factory option?

NOT on local AUDM clusters.
On many asian variants , Yes.

[Boban]

http://img20.imageshack.us/img20/8178/2410061142ww0.jpg

Aftermarket, $25

[qstoria]

ask the seller?

[trdrz]

.......

[incoming]

u should remove the cluster and have a look if its stuck on

then u'd have ur answer

[Boban]

yeah sorry man, i painted mine white, it came black originally, so if you go aftermarket or some jdm ones only the circles are white not the whole thing

I just like white das all :p

Work in progress shot, stock dials and painted white surround (standard colour is black) and than i put the white dials over the top of the stock ones :thumbsup:
http://img145.imageshack.us/img145/9562/2411051729ly9.jpg

[fxr]

yeah sorry man, i painted mine white, it came black originally, so if you go aftermarket or some jdm ones only the circles are white not the whole thing

I just like white das all :p

Work in progress shot, stock dials and painted white surround (standard colour is black) and than i put the white dials over the top of the stock ones :thumbsup:


sorry for the hijack but boban could you tell me how you went about getting the cluster out to paint it? I havent searched around yet so sorry if thats a dumb question that always gets asked but im new here and still getting inspiration :P

[RIVAL]

http://www.ozhonda.com/forum/showthread.php?t=5978&highlight=removing+cluster

http://www.ozhonda.com/forum/showthread.php?t=57007&highlight=removing+cluster
i dunno if the 5th gen screws are in the same location but heres a full diy for removing the guage

[fxr]

http://www.ozhonda.com/forum/showthread.php?t=5978&highlight=removing+cluster

http://www.ozhonda.com/forum/showthread.php?t=57007&highlight=removing+cluster
i dunno if the 5th gen screws are in the same location but heres a full diy for removing the guage

legend :thumbsup:

[RIVAL]

haha its prelude one but no worries

[adnoh]

should be the aftermarket one...

coz it usually only comes with black colour and speeed meter is 220 km/h..

:)

[Boban]

sorry for the hijack but boban could you tell me how you went about getting the cluster out to paint it? I havent searched around yet so sorry if thats a dumb question that always gets asked but im new here and still getting inspiration :P

Same as the legend one except the clear bazel was glued on mine not held in with clips so i had to heat it up and slowly pry it appart with a flat head screwdriver or similar. Just be careful you don't snap the thing. And once done just glue it back up.

[fxr]

Same as the legend one except the clear bazel was glued on mine not held in with clips so i had to heat it up and slowly pry it appart with a flat head screwdriver or similar. Just be careful you don't snap the thing. And once done just glue it back up.

thanks :D