PDA

View Full Version : Calling all ED/EF owners engine conversion Question



Perry
07-01-2007, 07:14 PM
I'm at work at the moment dont have time using the search, How much hassle did u guys go through putting a b16a into a ED, i know about the EFI part. stuff like engine mounts etc etc

Thanks
Perry

Bayani
07-01-2007, 07:17 PM
If you don't know much about engines, or what you're going.. hand it over to a mechanic.

You'll be much happier with the results.

There are a few walk-throughs to help you.

Chi
07-01-2007, 08:05 PM
blardy perry, i told u, its not a easy swap.

Ed are POS chasis.

http://www.ozhonda.com/forum/showthread.php?t=32565

info there.

silver_screen
07-01-2007, 08:07 PM
im doin the swap also.. cept, i am a mechanic and ill be doing it myself :D

as for crap chassis.. its actually not that bad :) lil suspension work and it'll handle great :)

Concept R
07-01-2007, 08:58 PM
perry dun waste ur money ... chloe doesnt need b16a

Snoop_gee
07-01-2007, 11:29 PM
when you mean ED i believe you mean a CRX i hope.

Well with a crx gen2 in particular teh process dont come any easier.

Shopping list
*HASPORT ENGINE mounts
*Shift linkage
*Hydro to cable conversion (optional)
*Driveshafts you can get em custom made or again HASPORT

http://www.redpepperracing.com/gallery/d/134514-1/IMG_0005.JPG
http://www.redpepperracing.com/gallery/d/134530-1/IMG_0013.JPG

as you can see she fits in beautifully. no real drama to have it registered as teh stock AUSDM CRX si comes as a 1.6 (d16a8) so to have it converted to vtec b16a there is no drama to include P/S some do say it rubs a lil on teh ribs of teh bonnet but that can be fixed!

with 1 of 2 ways
1) lift kit washers and raise the latches to accomdate the rise in teh engine.
or
2) cut the ribs your call....

Leprechaun
08-01-2007, 08:16 AM
I've got the sohc vtec in my ed, no dramas at all... A great fun little car...

Perry
08-01-2007, 06:04 PM
I've got the sohc vtec in my ed, no dramas at all... A great fun little car...

Hey dude where u located in syd?, want to check out ur civic?>

ECU-MAN
08-01-2007, 10:55 PM
there is a DIY in the DIY section, for ED9 B16a convertion, you just have to add fuel lines, loom, tank, fuel pump, fuel filter if you have carby'z

newbie
10-01-2007, 10:12 AM
perry.. dont bother for your DD. keep your EK.. and save lah

iamhappy46
12-01-2007, 12:42 PM
My GF's old Civic with the D15B VTEC conversion :)

http://www.cardomain.com/ride/2101817

Leprechaun
12-01-2007, 12:49 PM
My GF's old Civic with the D15B VTEC conversion :)

http://www.cardomain.com/ride/2101817

Nice... I same set up on my ED, fun little package...